.44 Special Hornady XTP 200-grain

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Morne
OFCC Coordinator
OFCC Coordinator
Posts: 10631
Joined: Thu Jul 07, 2005 9:01 pm
Location: Wayne County

.44 Special Hornady XTP 200-grain

Post by Morne »

Decided to try and develop a .44 Special load using 200-gr Hornady XTP bullets. You know, for zombies and the like... :mrgreen:

***CHRONY DATA***

58 F, 30.04" Hg, 45%RH

.44 Special 200-gr Hornady XTP 1.476-1.483" COAL CCI-300LPP
Taurus Tracker with 4" ported barrel

HS-6 Powder:
8.0-gr - AVERAGE = 662 fps - ES = 6.8
8.5-gr - AVERAGE = 713 fps - ES = 49.2
9.0-gr - AVERAGE = 750 fps - ES = 83.6

IMR 4227 Powder:
14.5-gr - AVERAGE = 651 fps - ES = 16.2
15.0-gr - AVERAGE = 738 fps - ES = 117.4
15.4-gr - AVERAGE = 713 fps - ES = 89.3
15.8-gr - AVERAGE = 775 fps - ES = 53.4

That 15.8-gr IMR 4227 load looks like the best of the lot. The box of the Hornady bullets suggests 700fps minimum velocity. Might have to chrono this out of a 2" snubby to make sure it still develops 700 fps. I have no doubt that it will have plenty of velocity from a lever-action rifle platform but I am curious just what it will be.

Interesting aside - the bottom rung of each ladder showed remarkable velocity consistency (these are all 5-shot strings). Too slow to be useful, of course. I might have to try and develop some 200-gr cheapo/practice bullet loads with these two powders and see what sort of consistency I get. And before anybody asks, I am not going to expend a bunch more of these expensive bullets to get statistically significant data. You're just going to have to live with ES rather than SD.
Thus spoke Zarathustra.

Footsoldier in the Conservative Insurrection of the GOP.

Remember, only you can prevent big government!
Post Reply