Need gunsmith in Cleveland area
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- TRDFurgesson
- Posts: 78
- Joined: Mon Jul 18, 2011 4:20 pm
- Location: Powell
- Contact:
Need gunsmith in Cleveland area
I have an A2 forged FSB needing install to a CHF AR-15 barrel. These are new parts and needs to be set properly drilled and reamed for taper pins. I'm have only found pistol-smiths so far (B&T Middleburg and SDM). Any help guys??
Thanks, Bobby
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
-
- Posts: 979
- Joined: Sat Feb 05, 2011 11:50 am
- Location: Portage County
Re: Need gunsmith in Cleveland area
Try ProArmament in Cuyahoga Falls, they can probably recommend someone for you.
- TRDFurgesson
- Posts: 78
- Joined: Mon Jul 18, 2011 4:20 pm
- Location: Powell
- Contact:
Re: Need gunsmith in Cleveland area
They are not answering their phone.
Thanks, Bobby
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
- djmac1964
- OFCC Member
- Posts: 3138
- Joined: Sun Feb 15, 2009 3:01 pm
- Location: Brook Park OH
Re: Need gunsmith in Cleveland area
There is also Victory Arms in Berea. I used to have their contact info here, but I'm not sure where I put it. I actually found them the first time using the search function in my GPS.
ETA; Just found it on my GPS, I will send you a PM with the address & phone #.
ETA; Just found it on my GPS, I will send you a PM with the address & phone #.
Don M
U S Army Veteran 84-91
OFCC Patron Member
NRA Life Member
ORPA Member
WVCDL Member
NRA Certified Basic Pistol Instructor / RSO
Want to become more active with OFCC, and the fight for your rights? Click the link to find out how!
http://ohioccwforums.org/viewtopic.php?f=12&t=64852
U S Army Veteran 84-91
OFCC Patron Member
NRA Life Member
ORPA Member
WVCDL Member
NRA Certified Basic Pistol Instructor / RSO
Want to become more active with OFCC, and the fight for your rights? Click the link to find out how!
http://ohioccwforums.org/viewtopic.php?f=12&t=64852
- TRDFurgesson
- Posts: 78
- Joined: Mon Jul 18, 2011 4:20 pm
- Location: Powell
- Contact:
Re: Need gunsmith in Cleveland area
Thanks!!!!!!!!
Thanks, Bobby
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
- Kremlin_Joe
- Posts: 319
- Joined: Tue Jan 04, 2011 1:09 pm
- Location: Lakewood, OH
Re: Need gunsmith in Cleveland area
I think Victory Arms closed about a year ago. I remember stopping by having just found them and they were having a going out of business sale.
I'd try the guy down at stonewall.
-Mike
I'd try the guy down at stonewall.
-Mike
"BEHAVE Komrade, or I let fly with the NUKES!"
-
- Posts: 979
- Joined: Sat Feb 05, 2011 11:50 am
- Location: Portage County
Re: Need gunsmith in Cleveland area
Don't think Stonewall has a smith there anymore. The last one left a while ago and i think they had a guy in/out for a while.Kremlin_Joe wrote:I think Victory Arms closed about a year ago. I remember stopping by having just found them and they were having a going out of business sale.
I'd try the guy down at stonewall.
-Mike
They re-modeled the shop/range, so i don't think there is a smith area either.
- Bruenor
- Posts: 7306
- Joined: Mon Jul 24, 2006 3:03 pm
- Location: Geneva, OH
Re: Need gunsmith in Cleveland area
You could call Ohio Ordinance Works in Chardon, see what they can do for you.
http://www.ohioordnanceworks.com/Servic ... epair.page" onclick="window.open(this.href);return false;
http://www.ohioordnanceworks.com/Servic ... epair.page" onclick="window.open(this.href);return false;
Μολὼν λαβέ
"Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property. . . Horrid mischief would ensue were the law-abiding deprived of the use of them."
- Thomas Paine
"Malo periculosam, libertatem quam quietam servitutem."
- Thomas Jefferson
"Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property. . . Horrid mischief would ensue were the law-abiding deprived of the use of them."
- Thomas Paine
"Malo periculosam, libertatem quam quietam servitutem."
- Thomas Jefferson
-
- Posts: 849
- Joined: Sat Sep 12, 2009 5:51 pm
- Location: Solon/Twinsburg Area
Re: Need gunsmith in Cleveland area
TRD and I shoot with the guy who was in/out last at Stonewall.Kremlin_Joe wrote: I'd try the guy down at stonewall.
-Mike
-Erik
- Imcrazy
- Posts: 3644
- Joined: Sun Aug 17, 2008 6:41 pm
- Location: Medina County
Re: Need gunsmith in Cleveland area
https://plus.google.com/111324555803314 ... l=us&hl=en" onclick="window.open(this.href);return false;
Dave is the owner / gunsmith at creekside, he builds AR's seems like a good dude.
Dave is the owner / gunsmith at creekside, he builds AR's seems like a good dude.
-Aaron
- TRDFurgesson
- Posts: 78
- Joined: Mon Jul 18, 2011 4:20 pm
- Location: Powell
- Contact:
Re: Need gunsmith in Cleveland area
Thanks guys!
Eric, this is for a mid-length gas AR i just put together. Spikes upper, Spikes lower, Spikes CHF elite 16" mid barrel, Bravo BCG/handle, RRA two stage NM trigger, and the same MOE furniture as my carbine length but in OD green. I gotta work in CMH tomorrow so this afternoon I found a guy down there to pin this FSB. Not sure if I'm gonna make it to IDPA on Friday so I shot SCSA IDPA tonight.
Cya bud
Eric, this is for a mid-length gas AR i just put together. Spikes upper, Spikes lower, Spikes CHF elite 16" mid barrel, Bravo BCG/handle, RRA two stage NM trigger, and the same MOE furniture as my carbine length but in OD green. I gotta work in CMH tomorrow so this afternoon I found a guy down there to pin this FSB. Not sure if I'm gonna make it to IDPA on Friday so I shot SCSA IDPA tonight.
Cya bud
Thanks, Bobby
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
http://www.ashlandlakegunclub.org/idpa/index.html
A Glock that is not maintained will last, a Glock that is maintained will last a long time, and a Glock that is well maintained will last longer than you will.
- Kremlin_Joe
- Posts: 319
- Joined: Tue Jan 04, 2011 1:09 pm
- Location: Lakewood, OH
Re: Need gunsmith in Cleveland area
I haven't been there since they started the remodel. Crud, I really appreciated having a smith there. It was great having a good guy to ask questions and he never steered me wrong with any of his advice for parts or upgrades.Quack wrote:Don't think Stonewall has a smith there anymore. The last one left a while ago and i think they had a guy in/out for a while.Kremlin_Joe wrote:I think Victory Arms closed about a year ago. I remember stopping by having just found them and they were having a going out of business sale.
I'd try the guy down at stonewall.
-Mike
They re-modeled the shop/range, so i don't think there is a smith area either.
-Mike
"BEHAVE Komrade, or I let fly with the NUKES!"
- Glock Rock
- Posts: 993
- Joined: Mon Jul 04, 2005 8:50 am
- Location: Belly of the Beast (Cleveland)
Re: Need gunsmith in Cleveland area
Necro thread ARISE!
I need a 1911 "drop-in" barrel fitted a bit. In the past I have enlisted the gunsmith skills of Rich at B&T Shooting Supplies in Middleburg Hts., but I hear he is no longer with B&T Shooting.
Any recommendations for a qualified 1911 barrel fitter in 216/330/440 area codes?
TIA.
I need a 1911 "drop-in" barrel fitted a bit. In the past I have enlisted the gunsmith skills of Rich at B&T Shooting Supplies in Middleburg Hts., but I hear he is no longer with B&T Shooting.
Any recommendations for a qualified 1911 barrel fitter in 216/330/440 area codes?
TIA.
- Bruenor
- Posts: 7306
- Joined: Mon Jul 24, 2006 3:03 pm
- Location: Geneva, OH
Re: Need gunsmith in Cleveland area
you could give them a call over at Viktors Legacy in Fairport Harbour, east of Cleveland.
https://www.viktorslegacy.com/ccms/inde ... ontact-us/" onclick="window.open(this.href);return false;
https://www.viktorslegacy.com/ccms/inde ... ontact-us/" onclick="window.open(this.href);return false;
Μολὼν λαβέ
"Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property. . . Horrid mischief would ensue were the law-abiding deprived of the use of them."
- Thomas Paine
"Malo periculosam, libertatem quam quietam servitutem."
- Thomas Jefferson
"Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property. . . Horrid mischief would ensue were the law-abiding deprived of the use of them."
- Thomas Paine
"Malo periculosam, libertatem quam quietam servitutem."
- Thomas Jefferson
-
- OFCC Patron Member
- Posts: 191
- Joined: Fri Aug 12, 2016 4:36 pm
- Location: NE Ohio
Re: Need gunsmith in Cleveland area
I second this. I've had some 1911 work done there (as well as lever gun work).Bruenor wrote:you could give them a call over at Viktors Legacy in Fairport Harbour, east of Cleveland.
https://www.viktorslegacy.com/ccms/inde ... ontact-us/" onclick="window.open(this.href);return false;