HUG meeting Schedule Thread
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- Morne
- OFCC Coordinator
- Posts: 10631
- Joined: Thu Jul 07, 2005 9:01 pm
- Location: Wayne County
Re: HUG meeting Schedule Thread
channeling my inner Doc Holiday:
Say when...
Say when...
Thus spoke Zarathustra.
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
-
- Posts: 46
- Joined: Tue Oct 02, 2012 10:57 pm
- Location: Columbus
- Contact:
Re: HUG meeting Schedule Thread
This would be my first attendance to one of such a meeting, and i would be very interested.
Robert
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Next gathering is scheduled!
I have reserved the Conference Room at Cabela's for Sunday afternoon, January 25, 2015 from 4-6pm.
Pass the word and plan to attend.
Swap Brass: Bring what you don't use and trade/barter/beg for what you need.
Post here if you need or plan to bring something strange or unusual.
If you are bringing in items into the store, stop at the Gun Inspection station inside the front door to have it checked by the inspector in the orange vest.
Deli will be open for snacks and beverages.
BigBill
I have reserved the Conference Room at Cabela's for Sunday afternoon, January 25, 2015 from 4-6pm.
Pass the word and plan to attend.
Swap Brass: Bring what you don't use and trade/barter/beg for what you need.
Post here if you need or plan to bring something strange or unusual.
If you are bringing in items into the store, stop at the Gun Inspection station inside the front door to have it checked by the inspector in the orange vest.
Deli will be open for snacks and beverages.
BigBill
If you don't stand for something, You'll fall for anything.
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
If you bring brass or tools to trade, ask the person at the 'Gun Inspection' desk inside the front doors to check them before you bring them to the conference room.
Do NOT bring live ammo or firearms into the store.
If you have factory assembled ammo to trade, arrange the trade in the meeting, then make the trade after we leave the store.
Mostly, we just share whatever is on our mind about loading, casting, shooting, and all aspects of the sport.
Come when you can and leave when you need to, or at 6pm, when the store closes.
BigBill
Do NOT bring live ammo or firearms into the store.
If you have factory assembled ammo to trade, arrange the trade in the meeting, then make the trade after we leave the store.
Mostly, we just share whatever is on our mind about loading, casting, shooting, and all aspects of the sport.
Come when you can and leave when you need to, or at 6pm, when the store closes.
BigBill
If you don't stand for something, You'll fall for anything.
- Klingon00
- Posts: 3825
- Joined: Tue Dec 09, 2008 11:47 am
- Location: Columbus, OH
Re: HUG meeting Schedule Thread
Awesome, I'll plan to attend. Good to hear from you Bill.
- Morne
- OFCC Coordinator
- Posts: 10631
- Joined: Thu Jul 07, 2005 9:01 pm
- Location: Wayne County
Re: HUG meeting Schedule Thread
Drat, wife is on call this weekend. I'm welded to the homestead (but will be shooting into the steel gongs anyway).
Thus spoke Zarathustra.
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
-
- OFCC Patron Member
- Posts: 6
- Joined: Wed Jan 14, 2015 4:14 pm
- Location: Blacklick, OH
Re: HUG meeting Schedule Thread
Rats, sorry I missed this. My Dillon 550B was just delivered today and I am looking forward to learning from you all. Can't wait until the next meeting.
Bill
MSGT (Ret.)
NRA Life Member
NRA Certified Basic Pistol Instructor
SA XDm 3.8 Compact .45
Colt 1911 (Built by RL Shocky)
High Standard Victor .22
MSGT (Ret.)
NRA Life Member
NRA Certified Basic Pistol Instructor
SA XDm 3.8 Compact .45
Colt 1911 (Built by RL Shocky)
High Standard Victor .22
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Looking at Sunday, May 17 for another Swap and Gab gathering.
Polaris area Starbucks or Panera?
How does this look?
Polaris area Starbucks or Panera?
How does this look?
If you don't stand for something, You'll fall for anything.
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
I can't make it May 17th.BigBill wrote:Looking at Sunday, May 17 for another Swap and Gab gathering.
Polaris area Starbucks or Panera?
How does this look?
But tentatively, I am going to vacation in Columbus over Labor Day and most of the week thereafter (Sept 5 - Sept 10). I hope that week would work for some people for a HUG meeting, as there are some OFCC'ers I'd enjoy seeing again.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
I won't be available the 17th sorry.
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: HUG meeting Schedule Thread
I'm also unavailable on the 17th.
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
HMMMM.....
Looks like a bunch of guys want to get together and avoid Bill!
Looks like a bunch of guys want to get together and avoid Bill!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Sevens is channeling my emotions again...
If you don't stand for something, You'll fall for anything.
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
We'll try another weekend.
Does Saturday or Sunday work better for a north end, Columbus meet up?
Does Saturday or Sunday work better for a north end, Columbus meet up?
If you don't stand for something, You'll fall for anything.
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
I need to be at work at 6pm sundays. Saturdays and sundays also depend on if mrs price had to work or not because the pricelings need supervision.BigBill wrote:We'll try another weekend.
Does Saturday or Sunday work better for a north end, Columbus meet up?
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.