Support The Forums:

The forums have been hosted for some time now out of my pocket. We are coming up on the annual domain renewal for ohioccwforums.org and I pay roughly $20/month to keep the forums online. I do this to maintain the long-standing history of discussions here indexed in Google, and so that people have a place to discuss this topic outside of modern social media censorship. If you enjoy the forums and you'd like to help offset the cost, please consider a venmo donation here

Steel gong targets (pic heavy)

This is where you can talk about all equipment issues; firearms, ammunition, magazines, care & repair, holsters, gun cases, etc.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Morne
OFCC Coordinator
OFCC Coordinator
Posts: 10631
Joined: Thu Jul 07, 2005 9:01 pm
Location: Wayne County

Re: Steel gong targets (pic heavy)

Post by Morne »

Mr. Glock wrote:I just had to buy some PVC pipe from the Big Box stores, for a non-plumbing project. I noticed the pre-cut 2 foot sections were 80% of the price of the 10 foot sections. And they will cut the 10 footers too, for free. I assume the price spread is similar for black iron pipe.
Yup.
Thus spoke Zarathustra.

Footsoldier in the Conservative Insurrection of the GOP.

Remember, only you can prevent big government!
Top
shooterwolf
Posts: 1455
Joined: Wed Jun 14, 2006 5:40 pm
Location: S.E.OHIO

Re: Steel gong targets (pic heavy)

Post by shooterwolf »

Cruiser wrote:
revred wrote:Interesting! I know we had to replace a section of torn belt last night at work. Wonder what they did with the scrap belt? :)
shooterwolf wrote:Talk to your buddies and find some conveyor belt, your chains won't last long.


S.W.
But, but, he isn't going to hit the chains! 8) :wink:
I'm willing to bet Morne won't hit the chains, his friends will wear them out though. :lol:



S.W.
Top
User avatar
MeanStreaker
OFCC Coordinator
OFCC Coordinator
Posts: 4086
Joined: Thu Sep 22, 2005 3:34 pm
Location: Dayton, OH

Re: Steel gong targets (pic heavy)

Post by MeanStreaker »

Morne wrote:
MeanStreaker wrote:On FB, I was really hoping for a shopping list of parts to replicate their angled down mounting kits. Is that doable or is there something really fancy in there? :)
Their mounting kits are actually less expensive than you could buy the parts for at a hardware store. That's why I went ahead and bought the kits (plus a spare) even though I was also making a hardware store shopping list. Their target stands are WAY too expensive IMHO, thus my desire to build my own from pipe-stock.
Good to know!
"Those who expect to reap the blessings of freedom must, like men, undergo the fatigue of supporting it." --Thomas Paine
Top
Post Reply

Return to “Firearms & Gear”