Gun Envy - Odds and Ends

Commercial sales are permitted in this forum IF they are products or services directly related to the firearms community and all rules posted within are followed.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: Gun Envy - Odds and Ends

Post by Sevens »

Can we find a link to this huge consignment?!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

Am adding them as I get a chance to the main http://www.gunenvy.com" onclick="window.open(this.href);return false; site under "firearms - used"

BTW the main site is real-time inventory with the store now.
https://t.me/pump_upp" onclick="window.open(this.href);return false;
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

Very limited supply of these, the delivery today of 40 will likely be exhausted by Monday:

New Frontier LW-15 Polymer Lowers

Image


$109 for a Complete lower.

If youre worried about it being polymer, please dont. We have run the test units under all manner of conditions including sustained full auto fire.
https://t.me/pump_upp" onclick="window.open(this.href);return false;
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

Kimber Custom II
Night Sights
8 Kimpro Magazines!

$750


Image
https://t.me/pump_upp" onclick="window.open(this.href);return false;
User avatar
FlyinCedar
Posts: 1755
Joined: Sun Jan 10, 2010 10:07 am
Location: Kenton, OH

Re: Gun Envy - Odds and Ends

Post by FlyinCedar »

We have a newly converted Saiga in 5.45 in the shop, conversion done in house. This is a brand new, unfired rifle. Tapco trigger group, T6 side folding stock. $675

Image

Image

We also have two converted 7.62x39 in house, one with ak style stock, one with T6 collapsible M4 style. Both have quad rails, your choice $799.
User avatar
pirateguy191
Posts: 11009
Joined: Sat Feb 14, 2009 12:06 pm
Location: 44146

Re: Gun Envy - Odds and Ends

Post by pirateguy191 »

YOU, my sir, are not Jonathon. :P
"In this present crisis, government is not the solution to our problem; government is the problem." - Ronald Reagan

"When democracy turns to tyranny, the armed citizen still gets to vote." ~ Mike Vanderboegh

NRA member, NRA basic pistol instructor, DBACB
User avatar
FlyinCedar
Posts: 1755
Joined: Sun Jan 10, 2010 10:07 am
Location: Kenton, OH

Re: Gun Envy - Odds and Ends

Post by FlyinCedar »

You are correct!!!

I am however, the Armorer at Gun Envy, a responsible party on the license, and the builder of these fine firearms :D

Oh, and I'm also Johnathan, but I spell mine correctly
User avatar
pirateguy191
Posts: 11009
Joined: Sat Feb 14, 2009 12:06 pm
Location: 44146

Re: Gun Envy - Odds and Ends

Post by pirateguy191 »

You don't have one of those silly accents, do you? :mrgreen:
"In this present crisis, government is not the solution to our problem; government is the problem." - Ronald Reagan

"When democracy turns to tyranny, the armed citizen still gets to vote." ~ Mike Vanderboegh

NRA member, NRA basic pistol instructor, DBACB
User avatar
FlyinCedar
Posts: 1755
Joined: Sun Jan 10, 2010 10:07 am
Location: Kenton, OH

Re: Gun Envy - Odds and Ends

Post by FlyinCedar »

Thankfully, I do not. His isn't real by the way. He fakes it. Don't tell him I told you
revred
Posts: 715
Joined: Sun Apr 06, 2008 8:19 pm
Location: Millersport, OH

Re: Gun Envy - Odds and Ends

Post by revred »

I probably already know the answer, but did these sell out as expected?
docpadds wrote:Very limited supply of these, the delivery today of 40 will likely be exhausted by Monday:

New Frontier LW-15 Polymer Lowers

Image


$109 for a Complete lower.

If youre worried about it being polymer, please dont. We have run the test units under all manner of conditions including sustained full auto fire.
"I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free, because I know that I alone am morally responsible for everything that I do." Professor Bernardo de La Paz in The Moon is a Harsh Mistress

"What are we going to do tonight, Brain?"
"The same thing we do every night, Pinky. Try to take over the world."
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

We bought a LOT of them :)

I have a few held back if you want one.
https://t.me/pump_upp" onclick="window.open(this.href);return false;
revred
Posts: 715
Joined: Sun Apr 06, 2008 8:19 pm
Location: Millersport, OH

Re: Gun Envy - Odds and Ends

Post by revred »

I'll get back to you! I need to check on how much my wife spent today. I felt a disturbance in the force earlier, like my checkbook was screaming out in pain. :wink:
docpadds wrote:We bought a LOT of them :)

I have a few held back if you want one.
"I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free, because I know that I alone am morally responsible for everything that I do." Professor Bernardo de La Paz in The Moon is a Harsh Mistress

"What are we going to do tonight, Brain?"
"The same thing we do every night, Pinky. Try to take over the world."
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

The old girl is going up for sale. She needs to go to a home thats going to love her:

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Serial Number: 603545 made between Oct. 24, 1918 to April 10, 1919

Currently has a Storm Lake barrel in it, with new bushing. The original barrel, bushing and magazine are with the gun! The original barrel is pretty worn out so I did not want to shoot it anymore, prefer to put the wear on the replacement.

She is all there and all original.

Looking for $1750 OBO
https://t.me/pump_upp" onclick="window.open(this.href);return false;
User avatar
FlyinCedar
Posts: 1755
Joined: Sun Jan 10, 2010 10:07 am
Location: Kenton, OH

Re: Gun Envy - Odds and Ends

Post by FlyinCedar »

We have a few things in the store that'll fit the bill if you're wanting to build that special rifle...

We ordered this stuff back in February, got it a few weeks ago, and have decided not to use it. That's a pretty standard wait time

We have the following for sale... Part numbers are included if you want to see pictures on the manufacturer site, http://www.megaarms.com" onclick="window.open(this.href);return false;

Mega billet monolithic upper, mid length, with forward assist and dust cover....... MTS-320-HA

MTS Piston, mid length, only works with above upper. You cannot use a different piston with the upper..... MTS-P300

Mega billet charging handle..... M0400

MAP in these items together is $909. PM me for special pricing for OFCC. Thanks!
User avatar
docpadds
Posts: 1389
Joined: Thu May 21, 2009 1:27 pm
Location: Ashville, OH

Re: Gun Envy - Odds and Ends

Post by docpadds »

If anyone is interested, we are selling 9mm HST 50 round boxes, 124grain or 124grain +p or even 147grain this Saturday only for $20 a box.

Yes thats 50 HST hollow points for $20.
https://t.me/pump_upp" onclick="window.open(this.href);return false;
Post Reply