LPP vs. SPP in .45 ACP
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- Morne
- OFCC Coordinator
- Posts: 10631
- Joined: Thu Jul 07, 2005 9:01 pm
- Location: Wayne County
LPP vs. SPP in .45 ACP
***CHRONY DATA***
38 F, 30.06" Hg, 62%RH
.45 ACP 230-gr X-Treme CPRN @1.255" COAL
S&W 625 with 4" barrel
W-231 Powder 5.6 grains:
WLP - AVERAGE = 768 fps - ES = 15.1
CCI500SPP - AVERAGE = 714 fps - ES = 91.2
Red Dot Powder 4.8 grains:
WLP - AVERAGE = 777 fps - ES = 21.6
CCI500SPP - AVERAGE = 743 fps - ES = 85.0
Promo Powder 5.1 grains:
WLP - AVERAGE = 826 fps - ES = 73.9
CCI500SPP - AVERAGE = 796 fps - ES = 31.3
WSF Powder 6.2 grains:
WLP - AVERAGE = 720 fps - ES = 26.5
CCI500SPP - AVERAGE = 697 fps - ES = 48.6
So as you can see the average ES is tighter for the LPP loads than the SPP loads with all other factors held equal.
The average of the ES:
LPP = 34.28
SPP = 64.02
Furthermore, the average velocity is 35.25 fps faster with the LPP rather SPP.
So now we have hard data that says not only is SPP .45ACP brass annoying but it is also demonstrably worse.
38 F, 30.06" Hg, 62%RH
.45 ACP 230-gr X-Treme CPRN @1.255" COAL
S&W 625 with 4" barrel
W-231 Powder 5.6 grains:
WLP - AVERAGE = 768 fps - ES = 15.1
CCI500SPP - AVERAGE = 714 fps - ES = 91.2
Red Dot Powder 4.8 grains:
WLP - AVERAGE = 777 fps - ES = 21.6
CCI500SPP - AVERAGE = 743 fps - ES = 85.0
Promo Powder 5.1 grains:
WLP - AVERAGE = 826 fps - ES = 73.9
CCI500SPP - AVERAGE = 796 fps - ES = 31.3
WSF Powder 6.2 grains:
WLP - AVERAGE = 720 fps - ES = 26.5
CCI500SPP - AVERAGE = 697 fps - ES = 48.6
So as you can see the average ES is tighter for the LPP loads than the SPP loads with all other factors held equal.
The average of the ES:
LPP = 34.28
SPP = 64.02
Furthermore, the average velocity is 35.25 fps faster with the LPP rather SPP.
So now we have hard data that says not only is SPP .45ACP brass annoying but it is also demonstrably worse.
Thus spoke Zarathustra.
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
- JustaShooter
- OFCC Coordinator
- Posts: 5805
- Joined: Thu Feb 07, 2013 3:08 pm
- Location: Akron/Canton Area
Re: LPP vs. SPP in .45 ACP
Thanks for that data! I've been culling SPP .45 ACP brass and setting it aside to sell/give away ever since it started showing up, glad to know I'm going the right direction.
Oh, and for the uninitiated:
LPP = Large Pistol Primers (as God and John Moses Browning intended the .45 ACP cartridge to have)
SPP = Small Pistol Primers (an abomination produced by tree-hugging leftists in their "non-toxic" .45 ACP loadings)
Oh, and for the uninitiated:
LPP = Large Pistol Primers (as God and John Moses Browning intended the .45 ACP cartridge to have)
SPP = Small Pistol Primers (an abomination produced by tree-hugging leftists in their "non-toxic" .45 ACP loadings)
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
-
- Posts: 191
- Joined: Mon Mar 31, 2014 1:24 pm
- Location: Bellefontaine OH
Re: LPP vs. SPP in .45 ACP
I've found I need ~0.2 grains more of the powders I've been using lately in .45 ACP (Bullseye and WST) to get same velocities from SPP as LPP.
If anyone is giving away small primer .45 brass please contact me. Not having to switch my 1050 priming system over is an advantage.
Hope everyone has a blessed Christmas season!
If anyone is giving away small primer .45 brass please contact me. Not having to switch my 1050 priming system over is an advantage.
Hope everyone has a blessed Christmas season!
-
- OFCC Member
- Posts: 345
- Joined: Fri Nov 20, 2009 11:39 am
- Location: Lorain County
Re: LPP vs. SPP in .45 ACP
you got that right!!Morne wrote:So now we have hard data that says not only is SPP .45ACP brass annoying but it is also demonstrably worse.
People say firearm owners are compensating for something.
I am compensating for being smaller and weaker than most criminals.
I am compensating for being smaller and weaker than most criminals.
- weakhand luke
- Posts: 1493
- Joined: Mon Jul 04, 2005 3:46 pm
- Location: Sweet Land of Liberty
Re: LPP vs. SPP in .45 ACP
Why, do you suppose?
- Morne
- OFCC Coordinator
- Posts: 10631
- Joined: Thu Jul 07, 2005 9:01 pm
- Location: Wayne County
Re: LPP vs. SPP in .45 ACP
Not entirely sure why. Anybody else?weakhand luke wrote:Why, do you suppose?
Thus spoke Zarathustra.
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
-
- OFCC Member
- Posts: 345
- Joined: Fri Nov 20, 2009 11:39 am
- Location: Lorain County
Re: LPP vs. SPP in .45 ACP
Here's what I've heard, but have no data to back up.
Smaller primer = smaller explosion. This is what creates the drop in velocity due to slightly slower powder ignition. Some folks talk about using small magnum primers to help adjust the velocity back to normal LPP levels, but I'm not sure how effective or repeatable that would be.
I curse every time I see a small pocket 45.
Smaller primer = smaller explosion. This is what creates the drop in velocity due to slightly slower powder ignition. Some folks talk about using small magnum primers to help adjust the velocity back to normal LPP levels, but I'm not sure how effective or repeatable that would be.
I curse every time I see a small pocket 45.
People say firearm owners are compensating for something.
I am compensating for being smaller and weaker than most criminals.
I am compensating for being smaller and weaker than most criminals.
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: LPP vs. SPP in .45 ACP
While I believe the result you found is the likely result that should be expected, I would like the test better if it were like branded primers. CCI-500 and CCI-300 for example. And then, it would be even more interesting to toss the CCI-400 (small rifle primer) in there also.
However, as I am not the guy doing the tests and reporting the results, I get what is offered!
Interesting and appreciated.
However, as I am not the guy doing the tests and reporting the results, I get what is offered!
Interesting and appreciated.
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- Morne
- OFCC Coordinator
- Posts: 10631
- Joined: Thu Jul 07, 2005 9:01 pm
- Location: Wayne County
Re: LPP vs. SPP in .45 ACP
Your point is well made.Sevens wrote:While I believe the result you found is the likely result that should be expected, I would like the test better if it were like branded primers. CCI-500 and CCI-300 for example. And then, it would be even more interesting to toss the CCI-400 (small rifle primer) in there also.
However, as I am not the guy doing the tests and reporting the results, I get what is offered!
Interesting and appreciated.
For two of these loads I also have CCI-300LPP data but I would caution that having been shot on a different date I don't recall the meteorological data and that might sway things. To truly test Gala Apples to Gala Apples I would like to shoot them same day:
W-231 with CCI-300LPP gave 699 fps and 28.8 ES. That is slower than either CCI-500SPP or WLP. The ES is tighter than CCI-500SPP but looser than WLP.
WSF with CCI-300LPP gave 703 fps and 27.1 ES. That is faster than CCI-500SPP but not as fast as WLP. The ES is tighter than CCI-500SPP and virtually identical to WLP.
Thus spoke Zarathustra.
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
Footsoldier in the Conservative Insurrection of the GOP.
Remember, only you can prevent big government!
-
- Posts: 191
- Joined: Mon Mar 31, 2014 1:24 pm
- Location: Bellefontaine OH
Re: LPP vs. SPP in .45 ACP
My .2 grain observation was with Federal LPP and Federal SPP, for what it's worth.Sevens wrote:While I believe the result you found is the likely result that should be expected, I would like the test better if it were like branded primers. CCI-500 and CCI-300 for example. And then, it would be even more interesting to toss the CCI-400 (small rifle primer) in there also.
d.
-
- OFCC Member
- Posts: 345
- Joined: Fri Nov 20, 2009 11:39 am
- Location: Lorain County
Re: LPP vs. SPP in .45 ACP
Does anyone know if the flash hole is the same diameter & length regardless of the primer pocket size? I'm sure tolerances are wide, but would imagine some kind of industry standard would be in play.
People say firearm owners are compensating for something.
I am compensating for being smaller and weaker than most criminals.
I am compensating for being smaller and weaker than most criminals.
- JustaShooter
- OFCC Coordinator
- Posts: 5805
- Joined: Thu Feb 07, 2013 3:08 pm
- Location: Akron/Canton Area
Re: LPP vs. SPP in .45 ACP
They should be the same, though I've not inspected the two to be sure. But in all other cartridges the flash hole is the same size - I know this because my flash hole deburring and uniforming tool works in all of them...cpg wrote:Does anyone know if the flash hole is the same diameter & length regardless of the primer pocket size? I'm sure tolerances are wide, but would imagine some kind of industry standard would be in play.
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
-
- OFCC Patron Member
- Posts: 2281
- Joined: Mon May 01, 2006 7:50 am
- Location: North East Ohio
Re: LPP vs. SPP in .45 ACP
What kind of accuracy are you getting with the Extreme plated bullets?
I have loaded up 1K of 9mm 147 grain Extreme plated and I'm not impressed with the accuracy.
I have loaded up 1K of 9mm 147 grain Extreme plated and I'm not impressed with the accuracy.
-
- Posts: 16237
- Joined: Mon Jul 04, 2005 8:42 pm
- Location: SW Ohio
Re: LPP vs. SPP in .45 ACP
Being on the heavy side, they do better in barrels with faster rifling, as you likely know.Whirlwind06 wrote:What kind of accuracy are you getting with the Extreme plated bullets?
I have loaded up 1K of 9mm 147 grain Extreme plated and I'm not impressed with the accuracy.
Quit worrying, hide your gun well, shut up, and CARRY that handgun!
********************************************************************************
1911 and Browning Hi Power Enthusianado.
********************************************************************************
1911 and Browning Hi Power Enthusianado.
-
- OFCC Patron Member
- Posts: 2281
- Joined: Mon May 01, 2006 7:50 am
- Location: North East Ohio
Re: LPP vs. SPP in .45 ACP
My carry ammo 147 Grain Winchester Ranger (I forget the exact one) has acceptable accuracy from my pistols.
This is not just in 9mm. I have been shooting 45 ACP all summer. Started with ploy coated 185 grain that was giving me great results out of a G41.
Switched to Barry's plated 200 gain FP and wasn't nearly as good. Now using 200 grain blue bullets ploy-coated and I'm getting good results again.
I'm hitting the range like 3 or 4 times a week. When used to go only once a month or so I would blame myself for poor results.
Now I'm also seeing that sometimes it is the ammo and not just me.
This is not just in 9mm. I have been shooting 45 ACP all summer. Started with ploy coated 185 grain that was giving me great results out of a G41.
Switched to Barry's plated 200 gain FP and wasn't nearly as good. Now using 200 grain blue bullets ploy-coated and I'm getting good results again.
I'm hitting the range like 3 or 4 times a week. When used to go only once a month or so I would blame myself for poor results.
Now I'm also seeing that sometimes it is the ammo and not just me.