Page 1 of 1

3D Printed Primer Tray Funnel

Posted: Mon Mar 20, 2017 1:09 pm
by buckeye43210
This is a primer tray funnel. It makes loading square primer boxes into round primer trays easier. I took my measurements from a Federal primer box and one of the round Lee Auto Prime trays.

I also uploaded the source code for this object. Feel free to modify it for RCBS, or other manufacturer's primer trays. Just give me credit for any derived works.

Image

Re: 3D Printed Primer Tray Funnel

Posted: Mon Mar 20, 2017 1:14 pm
by JustaShooter
Nice! Where did you upload the object source?

Edit: Nevermind, I see the picture is a link to thingverse.

Re: 3D Printed Primer Tray Funnel

Posted: Mon Mar 20, 2017 1:17 pm
by buckeye43210
JustaShooter wrote:Nice! Where did you upload the object source?

Edit: Nevermind, I see the picture is a link to thingverse.
Yep, and the OpenSCAD file is here.

You can also open this in the Customizer and play around with some of the dimensions...

Re: 3D Printed Primer Tray Funnel

Posted: Sun Mar 26, 2017 3:00 pm
by The German
If you use the customizer in thingiverse and use

Ring height: 5.0
Outside diameter: 78.0
Inside width: 76.0
Wall thickness: 2.5

it should fit on all primer trays - not a snug fit, but if you first put it over the primer package, lay the primer tray on top and then flip it over, all primers will land on the tray. http://www.thingiverse.com/thing:2205751" onclick="window.open(this.href);return false;
Form customizing it specifically for LEE or RCBS trays, the RCBS primer tray has an inner diameter of 95mm, the LEE (for the loadmaster) 82.9mm

Re: 3D Printed Primer Tray Funnel

Posted: Sun Mar 26, 2017 3:55 pm
by buckeye43210
The German wrote:If you use the customizer in thingiverse and use

Ring height: 5.0
Outside diameter: 78.0
Inside width: 76.0
Wall thickness: 2.5

it should fit on all primer trays - not a snug fit, but if you first put it over the primer package, lay the primer tray on top and then flip it over, all primers will land on the tray. http://www.thingiverse.com/thing:2205751" onclick="window.open(this.href);return false;
Form customizing it specifically for LEE or RCBS trays, the RCBS primer tray has an inner diameter of 95mm, the LEE (for the loadmaster) 82.9mm
Thanks for remixing my design.

Re: 3D Printed Primer Tray Funnel

Posted: Mon Mar 27, 2017 3:12 pm
by The German
I have a few printed - if anybody wants to pick one up for free in the West Chester area, send me a pm.

Re: 3D Printed Primer Tray Funnel

Posted: Wed Mar 29, 2017 9:49 am
by buckeye43210
Here's what the current design looks like. It is customizable for different primer box and primer tray sizes.

Image

Re: 3D Printed Primer Tray Funnel

Posted: Tue Apr 04, 2017 2:51 pm
by buckeye43210
I've added an adapter for smaller primer boxes.

Image