Picked up a Rem 700 300 blackout 16" the other day
Ordered dies and a trim die.
Found H110
Thinking about trying the xtreme plated 150gr flat tips, can't beat the price.
Anyone load plated in the blk yet?
Also thinking about cast 200+ grain
Who loads 300 Blackout for bolt guns
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
Who loads 300 Blackout for bolt guns
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
Re: Who loads 300 Blackout for bolt guns
Really no one loads 300 blk for bolt action rifles
WOW
WOW
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
- tbram88
- Posts: 779
- Joined: Tue Mar 10, 2009 4:54 pm
- Location: Toledo area
- Contact:
Re: Who loads 300 Blackout for bolt guns
I load 300 BLK for my AR, I like 155 gr. cast with GC over 16.7 gr H110 and SR primer C.O.L 2.025
They make a nice cheap practice load at around 1850 FPS.
I'm sure they would work well in a bolt action.
All the best...Bob.
They make a nice cheap practice load at around 1850 FPS.
I'm sure they would work well in a bolt action.
All the best...Bob.
A democracy is nothing more than mob rule, where fifty-one percent of the people may take away the rights of the other forty-nine. -Thomas Jefferson
Then it comes to be that the soothing light at the end of your tunnel is just a freight train coming your way. -Metallica (No Leaf Clover)
ΜΟΛΩΝ ΛΑΒΕ!!
Then it comes to be that the soothing light at the end of your tunnel is just a freight train coming your way. -Metallica (No Leaf Clover)
ΜΟΛΩΝ ΛΑΒΕ!!
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
Re: Who loads 300 Blackout for bolt guns
Sadly I missed out on 8# of WC820/H110 for $120 because I was being nice and waiting on a buddy to buy one and split hazmat.
Won't do that again.
Where you getting bullets Bob?
I was thinking about the 150gr xtreme plated.
And whatever power I can find local H110, Win 296, or IMR 4227
Won't do that again.
Where you getting bullets Bob?
I was thinking about the 150gr xtreme plated.
And whatever power I can find local H110, Win 296, or IMR 4227
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
- tbram88
- Posts: 779
- Joined: Tue Mar 10, 2009 4:54 pm
- Location: Toledo area
- Contact:
Re: Who loads 300 Blackout for bolt guns
The mold I bought was for 7.62x39 they cast at .312 http://www.titanreloading.com/molds/bul ... 12-155-2r-
I size them to.309 when I install the gas check. My barrel slugged at .3075 or so I can't remember.
I have also used jacketed 125 gr. sierra spire point with 17 gr H110
There is a lot of load data on the forum using different powders http://www.300blktalk.com/forum/index.php
All the best...Bob.
I size them to.309 when I install the gas check. My barrel slugged at .3075 or so I can't remember.
I have also used jacketed 125 gr. sierra spire point with 17 gr H110
There is a lot of load data on the forum using different powders http://www.300blktalk.com/forum/index.php
All the best...Bob.
A democracy is nothing more than mob rule, where fifty-one percent of the people may take away the rights of the other forty-nine. -Thomas Jefferson
Then it comes to be that the soothing light at the end of your tunnel is just a freight train coming your way. -Metallica (No Leaf Clover)
ΜΟΛΩΝ ΛΑΒΕ!!
Then it comes to be that the soothing light at the end of your tunnel is just a freight train coming your way. -Metallica (No Leaf Clover)
ΜΟΛΩΝ ΛΑΒΕ!!