HUG meeting Schedule Thread
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: HUG meeting Schedule Thread
Do you want the rest of us to bring some wheel weights or other forms of raw lead to the party?
-
BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
If nobody else offers a location, I think we could meet again at my place. We could 'Circle the wagons' and setup in the parking lot. I've got the sawhorses/board to make a bench to cool ingots on.
When would be a good date? April 6th is open for me.
If we want to start at about 6pm, we can chip in for a Pizza or two and fire up the smelter(s) early.
Bill
Westerville
If this is a good idea, I'll re-post the address. I edited it out of the earlier posts.
When would be a good date? April 6th is open for me.
If we want to start at about 6pm, we can chip in for a Pizza or two and fire up the smelter(s) early.
Bill
Westerville
If this is a good idea, I'll re-post the address. I edited it out of the earlier posts.
If you don't stand for something, You'll fall for anything.
-
BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
Is there anyplace in your parking lot that is at least 10-15 feet away from a building and is level?BigBill wrote:If nobody else offers a location, I think we could meet again at my place. We could 'Circle the wagons' and setup in the parking lot.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
-
BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
It looks like the most level spot is right in front of the front door.
The slope is about the same as your normal driveway.
We can park cars parallel to the building, 30-40 ft away.
If the weather doesn't cooperate, we can still meet inside and forgo the demonstration.
The slope is about the same as your normal driveway.
We can park cars parallel to the building, 30-40 ft away.
If the weather doesn't cooperate, we can still meet inside and forgo the demonstration.
If you don't stand for something, You'll fall for anything.
-
Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
Tuesday, April 6th also works for me.
I don't have any lead to bring.
But I'll be there for the camaraderie more than the bullets.
I don't have any lead to bring.
But I'll be there for the camaraderie more than the bullets.I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
-
BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
Well, you still have 19 days to find some . . . .Sevens wrote:Tuesday, April 6th also works for me.
I don't have any lead to bring.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
-
Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
Count me IN.
I still have no lead to offer. The real boner of that is that I bought a stinkin' brand new car tire last week ($$$) and tried to beg, borrow or steal a bucket of lead from the guys at the tire shop. No can do.
I got nuthin'.
I still have no lead to offer. The real boner of that is that I bought a stinkin' brand new car tire last week ($$$) and tried to beg, borrow or steal a bucket of lead from the guys at the tire shop. No can do.
I got nuthin'.
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
-
evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
Guys- I just got the soccer schedule in email, we start practices Tuesday the 6th at 6:30.
So that means I am out for this one. Sorry!
The only day that would work for me is the 7th.
So that means I am out for this one. Sorry!
The only day that would work for me is the 7th.
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
-
BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
I can do the 7th. Works better for me than the 6th.evan price wrote:The only day that would work for me is the 7th.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
-
Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
If moving it to the 7th gets me closer to Evan Price's little baggies of .32 H&R and 10mm brass, then I'm all for moving it to the 7th! 
(plus it gives me one more day to find some lead!
)
(plus it gives me one more day to find some lead!
)I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
-
buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: HUG meeting Schedule Thread
Try putting on a hooded robe and ring a bell while walking up and down the streets with a cart and yell, "Bring out your lead!"Sevens wrote:(plus it gives me one more day to find some lead!
Last edited by buckeye43210 on Thu Apr 01, 2010 10:43 am, edited 1 time in total.
-
Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
I could tell them that I work in conjunction with the U.S. Census and their participation is required by law!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
-
BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Wednesday, April 7th work for me too.
BigBill
BigBill
If you don't stand for something, You'll fall for anything.
-
BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I have a 5 gal pail of WW to be s'melted!
I'll have to go through it to sort out the soft lead (tape) weights and the zinc crap from the meltable stock.
I also scored another muffin pan and a medium size SS bowl to do the soft lead apart from the WW stock.
BobK will you be able to bring your furnace, bowl, dippers, and thermometer? Somebody have some parafin?
Bring your own eye protection and leather gloves if you plan to help.
We can gather any time after 6pm for the demo / exercise. Come when you can, leave when you need to.
BB
Please post a 'will attend' note here. If the weather take a turn (rain), we can still meet to swap stories and answer questions.
I'll have to go through it to sort out the soft lead (tape) weights and the zinc crap from the meltable stock.
I also scored another muffin pan and a medium size SS bowl to do the soft lead apart from the WW stock.
BobK will you be able to bring your furnace, bowl, dippers, and thermometer? Somebody have some parafin?
Bring your own eye protection and leather gloves if you plan to help.
We can gather any time after 6pm for the demo / exercise. Come when you can, leave when you need to.
BB
Please post a 'will attend' note here. If the weather take a turn (rain), we can still meet to swap stories and answer questions.
If you don't stand for something, You'll fall for anything.
-
Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
#$&# #$@ it.
I can't do it on Wednesday.
I can do Monday... I could do Thursday. Evan is no good for Tuesday and I can't do Wednesday.
I wonder if I'll ever make another meeting?
I can't do it on Wednesday.
I can do Monday... I could do Thursday. Evan is no good for Tuesday and I can't do Wednesday.
I wonder if I'll ever make another meeting?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!