I’ll be ordering it off his website - get a signature that way for the same price
Anyho, a bit more detail on all that brass I picked up:
Spent a few hours on Sunday picking up brass after a match at the local club. My compact Ammo-up isn’t the greatest - it’s a new tool, so I’m giving it a benefit of the doubt that it’s my lack of technique at this moment. My stand-by nutpicker worked as well as always. Not perfect, but good enough, and much faster than picking by hand. I didn’t do one bay with a bunch of brass due to the mulch, as it would require me to pick by hand, and I’d rather not do that if I don’t have to. I happily settled for 2 bays with high brass quantities, 1 with medium, and 1 with low.
The efforts gave me 3/4 of a 5 gallon bucket worth of brass for 2 hours worth of work. I’m sure there’s some .380 mixed in there, but the majority is 9mm, .38 Super/comp, .40, 5.56, steel 7.62x39, and some .45ACP. Next step is to sort it all.
The way I go about this is the plates with slots that many folks use, successfully. I took my old vibratory tumbler, removed the bowl, and mounted a 5 gallon bucket on the threaded rod. I then put the plates on top of the bucket, and dump in the brass. The video below shows how quickly it is to sort .45ACP out of 1/4 of that bucket of brass (about 2 minutes).
Mix and repeat for the other 2 plates, then put the .45 plate back in with the .380/9mm separator.https://m.youtube.com/watch?v=HIi43QK3rg0
Never settle for the ordinary.
Rights cease to exist when restrictions are put on them.