HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
augiet65
Posts: 172
Joined: Sun Jun 03, 2007 12:09 am

Re: HUG meeting Schedule Thread

Post by augiet65 »

Saturday is better. I have obligations on Sunday.
Coin Carrying member of OFCC
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

Yeah, Saturday the 24th for 2pm works for me.
Here's my vote for the classic Polaris Starbucks. All in favor? All opposed?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
AndMetal
Posts: 286
Joined: Tue Dec 29, 2009 7:17 am
Location: Johnstown, OH

Re: HUG meeting Schedule Thread

Post by AndMetal »

I should be able to make it, and may bring as many as 3 others.
Ruger P95 9mm
More to come, I'm sure.
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I can be there Sat the 24th at 2pm.
Polaris Pkwy, just west of Sancus, near the Wafflehouse.

Usual topics and brass swap activity...

Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
If you don't stand for something, You'll fall for anything.
Orochimaru
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Post by Orochimaru »

BigBill wrote: ...
Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
Ditto! This is next for me, too.

So -- are we on for Saturday the 24th?
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Orochimaru wrote:So -- are we on for Saturday the 24th?
Short answer: Yes
If you don't stand for something, You'll fall for anything.
augiet65
Posts: 172
Joined: Sun Jun 03, 2007 12:09 am

Re: HUG meeting Schedule Thread

Post by augiet65 »

BigBill wrote:
Orochimaru wrote:So -- are we on for Saturday the 24th?
Short answer: Yes
Long answer " Yes we are"
Coin Carrying member of OFCC
User avatar
LSglock89
Posts: 451
Joined: Wed Jun 22, 2011 11:12 pm
Location: Mansfield, Ohio

Re: HUG meeting Schedule Thread

Post by LSglock89 »

I'd definitely like to come down to one of these meetings sometime. I really want to start reloading...I have a few manuals in PDF form...and it would be nice to learn from others and get some tips on equipment and the such.

I work 3rd shift right now and Columbus is a little drive so I'll keep watch of the dates/times and see when I can make it.
Orochimaru
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Post by Orochimaru »

Woo hoo! The 24th is goin' on the calendar.
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

LS, which Plymouth, Ohio are you in?
I found one in Richland county and one south of Ashtabula.
If you don't stand for something, You'll fall for anything.
trailerdave
Posts: 19
Joined: Thu Oct 13, 2011 7:23 am
Location: columbus

Re: HUG meeting Schedule Thread

Post by trailerdave »

ok fill me in when and where ill be there for shure thanks guys
Orochimaru
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Post by Orochimaru »

Saturday the 24th @ 2:00pm
We meet at the Starbuck's on Polaris Parkway -- south side of the road, near the waffle house. It is just east of Sancus Boulevard.

The official address of this Starbucks is:

1187 Polaris Parkway
Columbus, OH 43240
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
trailerdave
Posts: 19
Joined: Thu Oct 13, 2011 7:23 am
Location: columbus

Re: HUG meeting Schedule Thread

Post by trailerdave »

thanks Orochimaru ill be there for shure
blah
Posts: 1282
Joined: Sat Mar 06, 2010 2:38 pm
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by blah »

I won't be able to make this one.
~ Glen

What part of "shall not be infringed" is so difficult to understand?
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I finished sorting the range fodder from my last three trips...

I have 49 pcs of 10mm for whomever wants to buy me a Grande Mocha Frappucino at the next HUG gathering.

Do we have any new reloaders that can use some 9mm brass to get started? I'll bring a peanutbutter jar full.
If you don't stand for something, You'll fall for anything.
Post Reply