HUG meeting Schedule Thread
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 172
- Joined: Sun Jun 03, 2007 12:09 am
Re: HUG meeting Schedule Thread
Saturday is better. I have obligations on Sunday.
Coin Carrying member of OFCC
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
Yeah, Saturday the 24th for 2pm works for me.
Here's my vote for the classic Polaris Starbucks. All in favor? All opposed?
Here's my vote for the classic Polaris Starbucks. All in favor? All opposed?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
-
- Posts: 286
- Joined: Tue Dec 29, 2009 7:17 am
- Location: Johnstown, OH
Re: HUG meeting Schedule Thread
I should be able to make it, and may bring as many as 3 others.
Ruger P95 9mm
More to come, I'm sure.
More to come, I'm sure.
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I can be there Sat the 24th at 2pm.
Polaris Pkwy, just west of Sancus, near the Wafflehouse.
Usual topics and brass swap activity...
Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
Polaris Pkwy, just west of Sancus, near the Wafflehouse.
Usual topics and brass swap activity...
Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
If you don't stand for something, You'll fall for anything.
-
- Posts: 521
- Joined: Wed May 04, 2011 4:59 pm
- Location: Northern Franklin County
Re: HUG meeting Schedule Thread
Ditto! This is next for me, too.BigBill wrote: ...
Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
So -- are we on for Saturday the 24th?
The second amendment is why we're citizens and not subjects...
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Short answer: YesOrochimaru wrote:So -- are we on for Saturday the 24th?
If you don't stand for something, You'll fall for anything.
-
- Posts: 172
- Joined: Sun Jun 03, 2007 12:09 am
Re: HUG meeting Schedule Thread
Long answer " Yes we are"BigBill wrote:Short answer: YesOrochimaru wrote:So -- are we on for Saturday the 24th?
Coin Carrying member of OFCC
- LSglock89
- Posts: 451
- Joined: Wed Jun 22, 2011 11:12 pm
- Location: Mansfield, Ohio
Re: HUG meeting Schedule Thread
I'd definitely like to come down to one of these meetings sometime. I really want to start reloading...I have a few manuals in PDF form...and it would be nice to learn from others and get some tips on equipment and the such.
I work 3rd shift right now and Columbus is a little drive so I'll keep watch of the dates/times and see when I can make it.
I work 3rd shift right now and Columbus is a little drive so I'll keep watch of the dates/times and see when I can make it.
-
- Posts: 521
- Joined: Wed May 04, 2011 4:59 pm
- Location: Northern Franklin County
Re: HUG meeting Schedule Thread
Woo hoo! The 24th is goin' on the calendar.
The second amendment is why we're citizens and not subjects...
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
LS, which Plymouth, Ohio are you in?
I found one in Richland county and one south of Ashtabula.
I found one in Richland county and one south of Ashtabula.
If you don't stand for something, You'll fall for anything.
-
- Posts: 19
- Joined: Thu Oct 13, 2011 7:23 am
- Location: columbus
Re: HUG meeting Schedule Thread
ok fill me in when and where ill be there for shure thanks guys
-
- Posts: 521
- Joined: Wed May 04, 2011 4:59 pm
- Location: Northern Franklin County
Re: HUG meeting Schedule Thread
Saturday the 24th @ 2:00pm
We meet at the Starbuck's on Polaris Parkway -- south side of the road, near the waffle house. It is just east of Sancus Boulevard.
The official address of this Starbucks is:
1187 Polaris Parkway
Columbus, OH 43240
We meet at the Starbuck's on Polaris Parkway -- south side of the road, near the waffle house. It is just east of Sancus Boulevard.
The official address of this Starbucks is:
1187 Polaris Parkway
Columbus, OH 43240
The second amendment is why we're citizens and not subjects...
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
-
- Posts: 19
- Joined: Thu Oct 13, 2011 7:23 am
- Location: columbus
Re: HUG meeting Schedule Thread
thanks Orochimaru ill be there for shure
-
- Posts: 1282
- Joined: Sat Mar 06, 2010 2:38 pm
- Location: Columbus, OH
Re: HUG meeting Schedule Thread
I won't be able to make this one.
~ Glen
What part of "shall not be infringed" is so difficult to understand?
What part of "shall not be infringed" is so difficult to understand?
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I finished sorting the range fodder from my last three trips...
I have 49 pcs of 10mm for whomever wants to buy me a Grande Mocha Frappucino at the next HUG gathering.
Do we have any new reloaders that can use some 9mm brass to get started? I'll bring a peanutbutter jar full.
I have 49 pcs of 10mm for whomever wants to buy me a Grande Mocha Frappucino at the next HUG gathering.
Do we have any new reloaders that can use some 9mm brass to get started? I'll bring a peanutbutter jar full.
If you don't stand for something, You'll fall for anything.