Fs Florida Power Mechanics Kit Price reduced

All other items can be listed here.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
door5678
Posts: 84
Joined: Wed Oct 10, 2007 9:24 pm

Fs Florida Power Mechanics Kit Price reduced

Post by door5678 »

I used this for a project about two years ago has minor scuffs on the Impact Wrench could be polished out. Asking 80.00 obo will ship after check clears or will meet if you live near Cincinnati

Image

Image

What is included:

FPT200 1/2 in. Impact Wrench
375 ft/lbs Torque
1- 4mm hex key
1- 1/2 in. x 3 in. extension bar
8- 1/2 in. Drive Sockets: 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in.
FPT210 3/8 in. Air Ratchet
55 ft/lbs Torque
1- 3/8 in. to 1/2 in. adaptor
1- Screwdriver Bit Holder (3/8 in.)
10- Assorted Screwdriver Bits
FPT220 Air Duster Gun
1- 1 in. high pressure nozzle
1- Safety nozzle
1- Rubber ti
1- Tapered hose tip
1- Inflator needle
Other Accessories
1- QC Coupler
2- Male Coupler
1- Female Coupler
1- Air Tool Oil
1- Thread Tape
1- Storage Case
Plus 2 extra fittings.
User avatar
makdaddy
Posts: 1571
Joined: Mon May 28, 2007 4:46 pm
Location: Columbus

Post by makdaddy »

What are the air requirements for the tools? I have a decent compressor but it might not be enough, figured I'd better ask..
If waterboarding was a sexual preference, it would be taught in public schools.
door5678
Posts: 84
Joined: Wed Oct 10, 2007 9:24 pm

Post by door5678 »

thats all you need if your just doing normal auto work like brakes on you car or truck its just fine. I used it with a little 2 gallon compressor. Just would run if I did two wheels in a row but the impact wrench never got weak.
Post Reply