Found a design for a 3D printed auto-disk blank on Thingiverse. This design could be further customized.
Anyone able to tell me the width and thickness of a MicroDisk powder bar in mm?
3D Printed Two Hole Auto-Disk Blank
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
- JustaShooter
- OFCC Coordinator
- Posts: 5809
- Joined: Thu Feb 07, 2013 3:08 pm
- Location: Akron/Canton Area
Re: 3D Printed Two Hole Auto-Disk Blank
This for the Lee Auto Disk?
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: 3D Printed Two Hole Auto-Disk Blank
Yes, it is.JustaShooter wrote:This for the Lee Auto Disk?
- JustaShooter
- OFCC Coordinator
- Posts: 5809
- Joined: Thu Feb 07, 2013 3:08 pm
- Location: Akron/Canton Area
Re: 3D Printed Two Hole Auto-Disk Blank
My calipers put it at 0.452" thick and 1.260" wide, making it 11.4808mm thick and 32.004mm wide.
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: 3D Printed Two Hole Auto-Disk Blank
Just to clarify, I would like to know the height and width of the bar the micro disk slides on. I expect it to be about 6mm thick.JustaShooter wrote:My calipers put it at 0.452" thick and 1.260" wide, making it 11.4808mm thick and 32.004mm wide.
- JustaShooter
- OFCC Coordinator
- Posts: 5809
- Joined: Thu Feb 07, 2013 3:08 pm
- Location: Akron/Canton Area
Re: 3D Printed Two Hole Auto-Disk Blank
I'm sorry, I must not understand what you are looking for. I have one of these:
Which does not appear to be anything like what you posted.
Which does not appear to be anything like what you posted.
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
NRA Life Member
NRA Certified Range Safety Officer
NRA Certified Pistol & Rifle Instructor
Want to become more active with OFCC and help fight for your rights? Click Here!
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
Re: 3D Printed Two Hole Auto-Disk Blank
Thank's everyone, I found my answer. For the curuious, the original Lee Micro Disk slider measures 6.30 by 10.47 mm
I plan on working up a basic design in OpenSCAD with dimensional variables to allow for fine tuning. Once that is done, I can start adding some additional features...
I plan on working up a basic design in OpenSCAD with dimensional variables to allow for fine tuning. Once that is done, I can start adding some additional features...
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA
- buckeye43210
- Posts: 818
- Joined: Thu Jan 01, 2009 7:47 am
- Location: Columbus, OH USA