Target loads - light bullets or heavy bullets?

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Morne
OFCC Coordinator
OFCC Coordinator
Posts: 10631
Joined: Thu Jul 07, 2005 9:01 pm
Location: Wayne County

Target loads - light bullets or heavy bullets?

Post by Morne »

Obviously, using a lighter bullet requires more powder while a heavier bullet requires less powder. So there's a trade off to be made.

For cowboy action loads I go with lightweight bullets (100-gr LRNFP for my .38 Specials) but that's because I'm trying to minimize recoil whether or not it is the most economical.

For everything else I use "typical" bullet weights. 230-gr for .45ACP, 240-gr for .44Mag (200-gr for .44Spl), 158-gr for .357Mag/.38Spl, etc.

How about everyone else? Anybody ever crunch the numbers on whether it is cheaper to buy heavier bullets and less powder or lighter bullets and more powder?
Thus spoke Zarathustra.

Footsoldier in the Conservative Insurrection of the GOP.

Remember, only you can prevent big government!
Brian D.
Posts: 16229
Joined: Mon Jul 04, 2005 8:42 pm
Location: SW Ohio

Re: Target loads - light bullets or heavy bullets?

Post by Brian D. »

I for one don't see much difference price-wise between those options. I've never been averse to hunting a little for a deal on closeouts when time allows, that's part of how I shop for components. This goes back to pre-internet days with the old "Shotgun News" publication. One source I grew very fond of was Natchez Shooters Supply, every so often they'd run killer sale prices on whatever bullets or powder they seemed to have too much of.
Quit worrying, hide your gun well, shut up, and CARRY that handgun!

********************************************************************************
1911 and Browning Hi Power Enthusianado.
User avatar
MyWifeSaidYes
OFCC Coordinator
OFCC Coordinator
Posts: 5449
Joined: Tue Feb 16, 2010 12:59 pm
Location: Central Ohio
Contact:

Re: Target loads - light bullets or heavy bullets?

Post by MyWifeSaidYes »

Morne wrote:Obviously, using a lighter bullet requires more powder while a heavier bullet requires less powder...
I dispute the "Obviously" part of this sentence. :wink:

The basic (and intermediate) physics involved takes this out of the realm of common knowledge.


Have you tried your hand at making your own bullets?
MyWifeSaidYes
sparky43040
Posts: 36
Joined: Mon Dec 05, 2016 8:26 am
Location: Bellefontine Ohio

Re: Target loads - light bullets or heavy bullets?

Post by sparky43040 »

I used to reload ALL my ammo...always practiced with my standard carry loads for same results on paper or BGs!

Shooting the same load all the time at whatever your target is will always get better results IMHO.

John
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: Target loads - light bullets or heavy bullets?

Post by Sevens »

If you are talking typical handgun fodder (such as the ones you listed), the bullet is always by far the biggest expense. In theory, a heavier bullet "costs" more but in practice, it ends up being economy of scale, and whichever weight is most popular is what usually ended up being the best buy, especially when many bullet makers compete with each other.

Powder is just -super- cheap. The slower burners, magnum loads, heavy charge weight and high-brow Finnish powders :wink: make for the most expensive powder charges... but still ends up being cheaper than the bullet.

In a low or medium pressure case like .38 or .44 Special, using a lighter bullet exacerbates the already too-roomy space. I would imagine especially .45 Colt works better with 250gr LFP than with 200gr slugs.

And if you are talking target loads... I would also stick to heavier weights rather than light. In .38 for example, the best target bullet is the 148gr hollow base swaged wadcutter and it's on the heavy-for-caliber end.
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
Post Reply