Decided I wanted to start reloading again (used to do rifle and handgun loads but now only doing 9mm) New press and all the components except powder are sitting on my bench. I checked every local gun store and no one had any kind of pistol powder. Just on a whim, checked a little gun store in Norton that I had been too 20 years ago. They had lots of pistol powder. Managed to snag some of the new Hodgdon CFE pistol and some HS-6. Does anyone have a good load for the CFE for 115 copper plated Berry bullets? I believe it would be same load data as lead bullets but not sure.
Carol
Lucked out on pistol powder
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 323
- Joined: Fri Mar 27, 2009 7:39 pm
Re: Lucked out on pistol powder
http://www.hodgdonreloading.com/data/pistol" onclick="window.open(this.href);return false;
gives you a good idea for the CFE powder (4.0 to 5.4 grain at 1.100 COL). For plated bullets, I start with the mid range for lead bullets and work my way up - typically got good results with that.
gives you a good idea for the CFE powder (4.0 to 5.4 grain at 1.100 COL). For plated bullets, I start with the mid range for lead bullets and work my way up - typically got good results with that.