9mm and 38 lead loads
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 728
- Joined: Fri Apr 28, 2006 9:43 am
- Location: SW Ohio
Re: 9mm and 38 lead loads
My 9mm load for lead is sitting at 1.085 OAL. I am loading that with HP38 at 3.3 grains which is the minimum charge listed in the book that I have. Their OAL for 3.3 is 1.090. The profile of that lead round nose that I am using does not seat in my XD unless it is shorter than 1.090. Test firing of this load shows that it is extremely mild. I know one of the big companies did some pressure testing and showed massive pressure spikes when seating depths were changed by .030, but that is quite a large change in size. Many of the loadings I saw were using LRN at 1.100.
-
- OFCC Member
- Posts: 488
- Joined: Wed Nov 05, 2008 8:06 pm
- Location: Powell, OH
Re: 9mm and 38 lead loads
You are, of course, correct. That is what I had intended to say. I appreciate the clarification.Not to be some kind of grammar or word-choice police, but it makes sense to point out that you may have meant to say "over pressure round"