.356 plated in 9mm?
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
.356 plated in 9mm?
Can I safely shoot .356 plated bullets in my 9mm?
I shoot .356 lead, and yes I know lead is softer.
But .001 I would think would be safe.
Lone Wolf barrel in a G17
I shoot .356 lead, and yes I know lead is softer.
But .001 I would think would be safe.
Lone Wolf barrel in a G17
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: .356 plated in 9mm?
It all depends on your barrel size. People over on the Castboolits website report slugging 9mm barrels for various firearms and seeing sizes range from .354" to .358".
If your Lone Wolf barrel is a tight barrel, it absolutely can and will increase pressures. In fact, the current issue of Handloader discusses this issue in rifles, where custom barrels are sometimes slightly undersized to increase velocity and accuracy, but it also increases pressure and the handloads need to be managed accordingly.
If your Lone Wolf barrel is a tight barrel, it absolutely can and will increase pressures. In fact, the current issue of Handloader discusses this issue in rifles, where custom barrels are sometimes slightly undersized to increase velocity and accuracy, but it also increases pressure and the handloads need to be managed accordingly.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
- weakhand luke
- Posts: 1493
- Joined: Mon Jul 04, 2005 3:46 pm
- Location: Sweet Land of Liberty
Re: .356 plated in 9mm?
This isn't exactly uncharted territory you're wading into here.
Check out the Berry's bullets web site and look at the *faq* link.
Check out the Berry's bullets web site and look at the *faq* link.
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
Re: .356 plated in 9mm?
The bullets are made for 38 super
So they are just a little longer.
So they are just a little longer.
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
- calvin56
- Posts: 1225
- Joined: Mon Feb 04, 2008 5:10 pm
- Location: Columbiana County
Re: .356 plated in 9mm?
Longer is going to raise pressure if you are loading to the same overall length. It will probably make as much or more difference than the .001 bigger diameter depending on how much too long they are. You've got two strikes against you. I'd do a lot more research if I was you, or pass.
- weakhand luke
- Posts: 1493
- Joined: Mon Jul 04, 2005 3:46 pm
- Location: Sweet Land of Liberty
Re: .356 plated in 9mm?
Loading wrote:The bullets are made for 38 super
So they are just a little longer.
Now I see where you are going with this.
What cal said^
-
- Posts: 13
- Joined: Tue Apr 02, 2013 11:10 am
- Location: Medina
Re: .356 plated in 9mm?
I shoot .355, .356 and .357 size bullets in 9mm and 38 Super, jacketed and cast. Plated bullets are more like cast than jacketed. .356 plated bullets in your 9 mm would be fine with normal loads if they are 115 or 124 gr loaded to normal OAL - but you have not told us the bullet weight, only that it is "longer". Need more info....
-
- Posts: 128
- Joined: Tue Jun 28, 2011 11:47 am
Re: .356 plated in 9mm?
135gr Plated bullets.
.356
.356
R.I.P The Late Great Sir Winston 1-5-01 to 8-10-13
- JediSkipdogg
- Posts: 10257
- Joined: Sun Jul 27, 2008 3:03 pm
- Location: Batavia
- Contact:
Re: .356 plated in 9mm?
He's probably talking about these....
http://www.berrysmfg.com/product-i14928 ... 00ct_.aspx" onclick="window.open(this.href);return false;
If you look at Berry's 9mm, they are the exact diameter...
http://www.berrysmfg.com/products-c11-9mm_356.aspx" onclick="window.open(this.href);return false;
Therefore, loading the 38 super as 9mm, I don't really see an issue. The issue you have is the grain, you are going to have to start low and have a chronograph to get your right load as you won't find 135 gr 9mm in any load manual probably.
http://www.berrysmfg.com/product-i14928 ... 00ct_.aspx" onclick="window.open(this.href);return false;
If you look at Berry's 9mm, they are the exact diameter...
http://www.berrysmfg.com/products-c11-9mm_356.aspx" onclick="window.open(this.href);return false;
Therefore, loading the 38 super as 9mm, I don't really see an issue. The issue you have is the grain, you are going to have to start low and have a chronograph to get your right load as you won't find 135 gr 9mm in any load manual probably.
Carrying Concealed Handguns - Signage Answers
Ohio Concealed Carry Classes in S/W Ohio
http://www.ProShootersTraining.com" onclick="window.open(this.href);return false;
I am not a lawyer. My answers are based on research, knowledge, and are generally backed up with facts, the Ohio Revised Code, or the United States Code.
Ohio Concealed Carry Classes in S/W Ohio
http://www.ProShootersTraining.com" onclick="window.open(this.href);return false;
I am not a lawyer. My answers are based on research, knowledge, and are generally backed up with facts, the Ohio Revised Code, or the United States Code.