OFCC Joins SCCC Lawsuit Against The Ohio State University

HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Coordinators, Moderators

Re: HUG meeting Schedule Thread

Postby augiet65 » Thu Mar 08, 2012 6:15 pm

Saturday is better. I have obligations on Sunday.
Coin Carrying member of OFCC

What a fun bachelor party (some NSFW language)
http://www.youtube.com/watch?v=q7pUYep7LNs
User avatar
augiet65
 
Posts: 172
Joined: Sun Jun 03, 2007 12:09 am
Location: Westerville, OH

Re: HUG meeting Schedule Thread

Postby Sevens » Fri Mar 09, 2012 8:53 am

Yeah, Saturday the 24th for 2pm works for me.
Here's my vote for the classic Polaris Starbucks. All in favor? All opposed?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
 
Posts: 6675
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Postby AndMetal » Sat Mar 10, 2012 12:37 am

I should be able to make it, and may bring as many as 3 others.
Ruger P95 9mm
More to come, I'm sure.
AndMetal
 
Posts: 286
Joined: Tue Dec 29, 2009 7:17 am
Location: Johnstown, OH

Re: HUG meeting Schedule Thread

Postby BigBill » Sun Mar 11, 2012 3:47 pm

I can be there Sat the 24th at 2pm.
Polaris Pkwy, just west of Sancus, near the Wafflehouse.

Usual topics and brass swap activity...

Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.
If you don't stand for something, You'll fall for anything.
User avatar
BigBill
 
Posts: 630
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Postby Orochimaru » Sun Mar 11, 2012 3:56 pm

BigBill wrote:...
Who is casting, lubing, and sizing?
I have supplies and some tools and I'm ready to get into it.
I'd like to pick some brains to get ahead of the learning curve.


Ditto! This is next for me, too.

So -- are we on for Saturday the 24th?
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
Orochimaru
 
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Postby BigBill » Sun Mar 11, 2012 4:15 pm

Orochimaru wrote:So -- are we on for Saturday the 24th?


Short answer: Yes
If you don't stand for something, You'll fall for anything.
User avatar
BigBill
 
Posts: 630
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Postby augiet65 » Sun Mar 11, 2012 5:06 pm

BigBill wrote:
Orochimaru wrote:So -- are we on for Saturday the 24th?


Short answer: Yes


Long answer " Yes we are"
Coin Carrying member of OFCC

What a fun bachelor party (some NSFW language)
http://www.youtube.com/watch?v=q7pUYep7LNs
User avatar
augiet65
 
Posts: 172
Joined: Sun Jun 03, 2007 12:09 am
Location: Westerville, OH

Re: HUG meeting Schedule Thread

Postby LSglock89 » Sun Mar 11, 2012 5:35 pm

I'd definitely like to come down to one of these meetings sometime. I really want to start reloading...I have a few manuals in PDF form...and it would be nice to learn from others and get some tips on equipment and the such.

I work 3rd shift right now and Columbus is a little drive so I'll keep watch of the dates/times and see when I can make it.
Dan Wesson Valor SS
Gen4 G17 FDE, Gen4 G42, Gen4 G23, G26, OD G19, G22, G23, G36
Ruger P95DC
User avatar
LSglock89
 
Posts: 380
Joined: Wed Jun 22, 2011 11:12 pm
Location: Plymouth, Ohio

Re: HUG meeting Schedule Thread

Postby Orochimaru » Sun Mar 11, 2012 6:11 pm

Woo hoo! The 24th is goin' on the calendar.
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
Orochimaru
 
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Postby BigBill » Sun Mar 11, 2012 8:54 pm

LS, which Plymouth, Ohio are you in?
I found one in Richland county and one south of Ashtabula.
If you don't stand for something, You'll fall for anything.
User avatar
BigBill
 
Posts: 630
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Postby trailerdave » Sat Mar 17, 2012 3:58 pm

ok fill me in when and where ill be there for shure thanks guys
trailerdave
 
Posts: 19
Joined: Thu Oct 13, 2011 7:23 am
Location: columbus

Re: HUG meeting Schedule Thread

Postby Orochimaru » Sat Mar 17, 2012 4:05 pm

Saturday the 24th @ 2:00pm
We meet at the Starbuck's on Polaris Parkway -- south side of the road, near the waffle house. It is just east of Sancus Boulevard.

The official address of this Starbucks is:

1187 Polaris Parkway
Columbus, OH 43240
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
Orochimaru
 
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Postby trailerdave » Sun Mar 18, 2012 6:41 am

thanks Orochimaru ill be there for shure
trailerdave
 
Posts: 19
Joined: Thu Oct 13, 2011 7:23 am
Location: columbus

Re: HUG meeting Schedule Thread

Postby blah » Sun Mar 18, 2012 7:47 pm

I won't be able to make this one.
~ Glen

What part of "shall not be infringed" is so difficult to understand?
blah
 
Posts: 1276
Joined: Sat Mar 06, 2010 2:38 pm
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Postby BigBill » Wed Mar 21, 2012 3:15 pm

I finished sorting the range fodder from my last three trips...

I have 49 pcs of 10mm for whomever wants to buy me a Grande Mocha Frappucino at the next HUG gathering.

Do we have any new reloaders that can use some 9mm brass to get started? I'll bring a peanutbutter jar full.
If you don't stand for something, You'll fall for anything.
User avatar
BigBill
 
Posts: 630
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

PreviousNext

Return to Handloading

Who is online

Users browsing this forum: No registered users and 1 guest