HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Gaspode
Posts: 1635
Joined: Tue Jan 18, 2011 7:09 pm
Location: Reynoldsburg, Ohio

Re: HUG meeting Schedule Thread

Post by Gaspode »

Orochimaru wrote:
You could have at least lied to me and said something like, "it was a light turnout and a rather mellow evening..."

:evil: :evil: :evil:
Nah, a good friend never sugar coats things... It was pretty epic.
Pride is all well and good. But a sausage is a sausage.

All humans are vermin in the eyes of Morbo.
blah
Posts: 1282
Joined: Sat Mar 06, 2010 2:38 pm
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by blah »

Gaspode wrote:Great meeting, awesome turnout!
It was pretty awesome. Glad I got to meet all of you. Had a great time. I'll definitely try to be a regular!
~ Glen

What part of "shall not be infringed" is so difficult to understand?
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

blah wrote:It was pretty awesome. Glad I got to meet all of you. Had a great time. I'll definitely try to be irregular!
You don't have to try too hard! :twisted:

Yep, lots o' fun at this one, but it was unpossible for me to hear what was going on at the west wing of the table, so I hope you guys handled it good down there. Chuck was the only smart one, he split the meeting up by doing the end-around and checking out both wings of the table.

I get the feeling that we didn't solve the worlds handloading problems at this meeting -- this one just kinda flowed like a gathering of gun guys. We touched on handloading a bit, but mostly just enjoyed the company. And the jaguar with the bladder control problem wearing the jeans that were 2.5 sizes too small. (or was I the only one who noticed that?!)
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
Chuck
OFCC Director
OFCC Director
Posts: 4753
Joined: Mon Nov 16, 2009 7:06 am
Location: Licking County

Re: HUG meeting Schedule Thread

Post by Chuck »

They were talking alot of handloading on the West end of the table. Since I don't handload, I moved after a while

Great time!!
I enjoyed meeting you all!
Ain't activism fun?

"Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company. " - George Washington

"I am only one, but I am one. I cannot do everything, but I can do something.
And because I can not do everything, I will not refuse to do the something I can do.
What I can do, I should do. And what I should do, by the grace of GOD, I will do."
- Edward Everett Hale (descendant of Nathan Hale)
blah
Posts: 1282
Joined: Sat Mar 06, 2010 2:38 pm
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by blah »

I didn't need to physically move. I could just turn my head and talk to each end :mrgreen:
~ Glen

What part of "shall not be infringed" is so difficult to understand?
User avatar
evan price
Forum Janitor
Forum Janitor
Posts: 9044
Joined: Sun Jul 02, 2006 9:23 pm
Location: Westfield, Ohio

Re: HUG meeting Schedule Thread

Post by evan price »

Plus we got a new member signed up hopefully.

Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.

Anybody want 4 tonnes of lead yet?

I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
"20% accurate as usual, Morty."

Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
User avatar
Gaspode
Posts: 1635
Joined: Tue Jan 18, 2011 7:09 pm
Location: Reynoldsburg, Ohio

Re: HUG meeting Schedule Thread

Post by Gaspode »

evan price wrote:Plus we got a new member signed up hopefully.

Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.

Anybody want 4 tonnes of lead yet?

I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
You can host the next smelting session... "Yes... yes let me show you.. Yes... now do that 500 more times and I think you'll have that mold down.. then we move on to the 38 wadcutters.."
Pride is all well and good. But a sausage is a sausage.

All humans are vermin in the eyes of Morbo.
blah
Posts: 1282
Joined: Sat Mar 06, 2010 2:38 pm
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by blah »

Gaspode wrote:
evan price wrote:Plus we got a new member signed up hopefully.

Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.

Anybody want 4 tonnes of lead yet?

I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
You can host the next smelting session... "Yes... yes let me show you.. Yes... now do that 500 more times and I think you'll have that mold down.. then we move on to the 38 wadcutters.."
that much lead. you might want to add another zero to that 500 :lol:
~ Glen

What part of "shall not be infringed" is so difficult to understand?
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Who is available for another Polaris area get-together on Sat, March 24?
Starbucks or Panera?
....arrive at 2pm?
If you don't stand for something, You'll fall for anything.
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

Unless we decide to leave town that weekend I'll be there.
Orochimaru
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Post by Orochimaru »

Same here... I should be available.
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

BigBill wrote:Who is available for another Polaris area get-together on Sat, March 24?
Starbucks or Panera?
....arrive at 2pm?
Sunday, March 25th at 2pm would serve me much better -- if possible.
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I would not be available that Sunday afternoon.
If more people can make it Sunday than Saturday... go ahead and change to Sunday.
If you don't stand for something, You'll fall for anything.
User avatar
Gaspode
Posts: 1635
Joined: Tue Jan 18, 2011 7:09 pm
Location: Reynoldsburg, Ohio

Re: HUG meeting Schedule Thread

Post by Gaspode »

Sorry, wont be able to make this one. I can never do Saturdays. Work doesn't allow for it. Any other day is doable.
Pride is all well and good. But a sausage is a sausage.

All humans are vermin in the eyes of Morbo.
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

I'm flexible as to Sat/Sun.
Post Reply