I'll plead guilty to spending that part of the evening on a five-mile walk with my gorgeous wife and her psychotic Weimaraner.Sevens wrote:Yes, and I was fully prepared to have a kinship with ya as we sipped our molten lead "coffees of the day" at the meeting last night but you never showed up!
Don't gimme no yadda about the distance either. 7pm and plenty of caffeine to get you home!
HUG meeting Schedule Thread
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
-
- Posts: 14074
- Joined: Tue Sep 27, 2005 6:08 pm
- Location: East of Cincinnati
Re: HUG meeting Schedule Thread
--
Someone edited my signature and deleted my posts, and all I got was... this edited signature.
Someone edited my signature and deleted my posts, and all I got was... this edited signature.
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.
Who is available to meet at the south end of Westerville?
The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.
We can meet from 7pm to whenever.
Bill
Who is available to meet at the south end of Westerville?
The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.
We can meet from 7pm to whenever.
Bill
If you don't stand for something, You'll fall for anything.
- Mr. Glock
- OFCC Patron Member
- Posts: 8965
- Joined: Wed Nov 01, 2006 3:20 pm
- Location: NE Ohio
Re: HUG meeting Schedule Thread
You guys really have to rename this thread...everytime I see it pop up on "View New Threads" I think a bunch of softies are going to do a bunch of hugging...
OFCC Patron, GOA, SAF, YouTube 2A Patreon, NRA Benefactor Life & Hot Stove League Member
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
My schedule looks GOOD for June 2nd, 7 pm at this location that I've not yet been to.
Sounds like a plan!
Sounds like a plan!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- Joe Reeser
- Posts: 24
- Joined: Sat May 02, 2009 7:50 pm
- Location: SW Ohio
Re: HUG meeting Schedule Thread
My son and I would both like to attend but I will have to double check my work schedule for that day. We are planning on getting into reloading together so as to split the cost. Neither one of us knows anything but we have read in a couple reloading manuals. I'll have to get back with you tomorrow if you don't mind a couple of noobs.BigBill wrote:I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.
Who is available to meet at the south end of Westerville?
The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.
We can meet from 7pm to whenever.
Bill
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
Joe Reeser wrote:My son and I would both like to attend but I will have to double check my work schedule for that day. We are planning on getting into reloading together so as to split the cost. Neither one of us knows anything but we have read in a couple reloading manuals. I'll have to get back with you tomorrow if you don't mind a couple of noobs.BigBill wrote:I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.
Who is available to meet at the south end of Westerville?
The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.
We can meet from 7pm to whenever.
Bill
N00bs are welcome and encouraged.
June 2 at 19:00 sounds good to me at this time.
What's the topic du jour?
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
- Joe Reeser
- Posts: 24
- Joined: Sat May 02, 2009 7:50 pm
- Location: SW Ohio
Re: HUG meeting Schedule Thread
I can't make it with my schedule this time. Maybe next time <shrug>
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Small group last evening. We welcomed Augie and got to know him a little better.
Any ideas for a topic for July?
The first Wednesday is July 7th. Anybody want to host?
BB
Any ideas for a topic for July?
The first Wednesday is July 7th. Anybody want to host?
BB
If you don't stand for something, You'll fall for anything.
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
Well, it is about a week away, so I thought it was time to "poke" this thread back to life.BigBill wrote:The first Wednesday is July 7th. Anybody want to host?
Wednesday, July 7th works for me. I'd be OK with going back to that Starbucks on Polaris Parkway. What do you guys want to do?
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
-
- Posts: 172
- Joined: Sun Jun 03, 2007 12:09 am
Re: HUG meeting Schedule Thread
July 7th works for me too. There are three Starbuck's on Polaris. What is the address so I can show up at the right one, or if I annoyed everyone last week you can give me the wrong address.
Coin Carrying member of OFCC
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
HUG Schedule:augiet65 wrote:There are three Starbuck's on Polaris. What is the address so I can show up at the right one,
Wednesday, July 7. 7:00pm to 9:30 whatever.
Starbucks
1187 Polaris Parkway, Columbus, OH - (614) 846-0902
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I just realized I have tix to see the Clippers play the Mud Hens on the 7th.
Sorry I can't make it this month.
BB
Sorry I can't make it this month.
BB
If you don't stand for something, You'll fall for anything.
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: HUG meeting Schedule Thread
Is anyone else coming tomorrow?
Is it just augiet65 and I?
Is it just augiet65 and I?
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
Sorry gents, I can't make it this time around. Summer is tough for me but I hope to make a real comeback in the fall!
Bill sent me a note to check out this thread and add my regrets. But it did give me an idea...
Any handloader types planning on attending PITP7? We could let the masses know that we'd have a press and some dies set up and we could do a very basic intro to handloading for anyone who is interested and has no idea what we do... or even just for folks that might be curious.
Setting up some casting equipment might be a little more involved than anyone wants -- but since I don't do that, I wouldn't really have a say!
Bill sent me a note to check out this thread and add my regrets. But it did give me an idea...
Any handloader types planning on attending PITP7? We could let the masses know that we'd have a press and some dies set up and we could do a very basic intro to handloading for anyone who is interested and has no idea what we do... or even just for folks that might be curious.
Setting up some casting equipment might be a little more involved than anyone wants -- but since I don't do that, I wouldn't really have a say!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
I'll be there Bob.
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.