HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I have a good friend that has sold his rifle and still has 530 rnds of 7.62x39 in 53 stripper clips.
He also has about 20 more empty stripper clips. This stuff is foreign mfg.
He has no idea what to ask. Can I get an offer?
I could get it and bring it Saturday if anybody is at all interested.

Re: offer to borrow bullet molds...
I'll let you guys know which ones I'd like to try.
If you don't stand for something, You'll fall for anything.
User avatar
buckeye43210
Posts: 818
Joined: Thu Jan 01, 2009 7:47 am
Location: Columbus, OH USA

Re: HUG meeting Schedule Thread

Post by buckeye43210 »

Thanks for everyone that showed up for today's meeting. We had an excellent turn out. If we keep growing, we may need to find a bigger place :-)

An idea for another location is El Jalapeno Mexican Grill. I made the mistake of telling sevens that is was a new Mexican restaurant, but he heard New Mexican restaurant. So I had to bluff my way through and tell him that New Mexican food was kind of like Texican food.

Anyway, they are located right across from a posted Applebees at the corner of Olentangy and Ackerman near The Ohio State University.
shortland
Posts: 37
Joined: Mon Mar 19, 2012 6:21 pm
Location: Columbus

Re: HUG meeting Schedule Thread

Post by shortland »

i had a blast got to meet alot of very friendley people and got alot of good ideas for my first reloading set up,
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

It was good seeing everyone.

As far a New Mexican as a location goes "If you plan it they will come".
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

I think the New Mexican food joint sounds like a fine idea.
Standard caveat: unless you guys wanna meet up at 1 pm on a weekday, then I'm out of weekday HUG meetings until roughly 2013. That's okay, I know a lot of folks can't do the weekend meetings... I can't do all the weekenders, either.

If you plan a weekday, I'll be there in spirit but won't attend. If you plan a weekend, try and make it a Sunday so Gaspode can hit it up. Now there's a somona-somona that can TALK for hours, wow. :shock:
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
Gaspode
Posts: 1635
Joined: Tue Jan 18, 2011 7:09 pm
Location: Reynoldsburg, Ohio

Re: HUG meeting Schedule Thread

Post by Gaspode »

Sevens wrote:I think the New Mexican food joint sounds like a fine idea.
Standard caveat: unless you guys wanna meet up at 1 pm on a weekday, then I'm out of weekday HUG meetings until roughly 2013. That's okay, I know a lot of folks can't do the weekend meetings... I can't do all the weekenders, either.

If you plan a weekday, I'll be there in spirit but won't attend. If you plan a weekend, try and make it a Sunday so Gaspode can hit it up. Now there's a somona-somona that can TALK for hours, wow. :shock:
Mhm. Hours and hours. Loose anyone else's dogs today? :lol: :twisted:
Pride is all well and good. But a sausage is a sausage.

All humans are vermin in the eyes of Morbo.
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

Those animals looked like a couple Siberian survivors running for Finland!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
shortland
Posts: 37
Joined: Mon Mar 19, 2012 6:21 pm
Location: Columbus

Re: HUG meeting Schedule Thread

Post by shortland »

you guys ant right! i bought some 45 swc yesterday but messed up and there lead ya think my kember will eat them ?or id be willing to trade for some 45 acp brass
iceollie12
Posts: 364
Joined: Tue Jan 27, 2009 1:54 pm
Location: West Chester, OH

Re: HUG meeting Schedule Thread

Post by iceollie12 »

Do you guys always meet around the Columbus area?
NRA Life Member
OFCC Member
Member, Fairfield Sportsmen's Association

"The superior man, when resting in safety, does not forget that danger may come. When in a state of security he does not forget the possibility of ruin. When all is orderly, he does not forget that disorder may come. Thus his person is not endangered, and his States and all their clans are preserved." - Confucius
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

iceollie12 wrote:Do you guys always meet around the Columbus area?
Yep.

However should someone want to host a meeting in another city I don't think anyone would do anything other than give advise and wish they could be there.
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Is it too soon to plan a May 5th or 6th gathering for some New Mexican food?
If you don't stand for something, You'll fall for anything.
User avatar
buckeye43210
Posts: 818
Joined: Thu Jan 01, 2009 7:47 am
Location: Columbus, OH USA

Re: HUG meeting Schedule Thread

Post by buckeye43210 »

BigBill wrote:Is it too soon to plan a May 5th or 6th gathering for some New Mexican food?
¿Cinco de Mayo o seis de Mayo? Gaspode prefiere los domingos...
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

BigBill wrote:Is it too soon to plan a May 5th or 6th gathering for some New Mexican food?
I'd be concerned that the place would be busy those days since everyone tends to go out for Mexican. I'd hate to squat on a table they could be turning over.

Oh and the more southern HUG meeting is this Thursday: http://pcsirange.com/index.php?view=det ... t&Itemid=9" onclick="window.open(this.href);return false;
User avatar
Gaspode
Posts: 1635
Joined: Tue Jan 18, 2011 7:09 pm
Location: Reynoldsburg, Ohio

Re: HUG meeting Schedule Thread

Post by Gaspode »

kb8dnr wrote:
BigBill wrote:Is it too soon to plan a May 5th or 6th gathering for some New Mexican food?
¿Cinco de Mayo o seis de Mayo? Gaspode prefiere los domingos...

Thank you google language translator... For the record I only speak "Kitchen Spanish".. I can do the 6th any time. The 5th would be a no go. That's my Monday.
Pride is all well and good. But a sausage is a sausage.

All humans are vermin in the eyes of Morbo.
Orochimaru
Posts: 521
Joined: Wed May 04, 2011 4:59 pm
Location: Northern Franklin County

Re: HUG meeting Schedule Thread

Post by Orochimaru »

Either day is okay with me... Although I would prefer it if we would hold the meeting in English. Failing that, I vote for Japanese.
The second amendment is why we're citizens and not subjects...

‎"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
Post Reply