HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
User avatar
Cloudwraith
OFCC Member
OFCC Member
Posts: 185
Joined: Mon Oct 03, 2011 5:43 pm
Location: Westerville, OH

Re: HUG meeting Schedule Thread

Post by Cloudwraith »

Sevens wrote:I have no interest in an open carry event.
I concur. Nothing against an open carry event but with only meeting once a month (or two sometimes) I'd prefer to concentrate on reloading topics.
Si Vis Pacem, Para Bellum
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Ok, we'll plan on a location in the Polaris area.
How about Panera?

++++++++++

On another topic, a friend just sent me this information about an auction of various tools and equipment.

A friend of his, Phil Stith, passed recently.
Phil Stith’s estate auction will be occurring this Saturday at the Delaware County Fair Grounds: http://www.auctionzip.com/Listings/2049262.html" onclick="window.open(this.href);return false;
If you don't stand for something, You'll fall for anything.
User avatar
Klingon00
Posts: 3824
Joined: Tue Dec 09, 2008 11:47 am
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by Klingon00 »

Panera is fine by me.
User avatar
Cloudwraith
OFCC Member
OFCC Member
Posts: 185
Joined: Mon Oct 03, 2011 5:43 pm
Location: Westerville, OH

Re: HUG meeting Schedule Thread

Post by Cloudwraith »

Sounds good.
Si Vis Pacem, Para Bellum
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

Who's up for this meeting? We have a roll call here?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
mreising
Posts: 6274
Joined: Mon Jul 04, 2005 8:07 pm
Location: Warren County

Re: HUG meeting Schedule Thread

Post by mreising »

Sevens wrote:I have no interest in an open carry event.
Of course not. Who wants to look at that ugly old Liberator pistol? :wink:
The tyrant will always find a pretext for his tyranny

Mark
NRA Training Counselor-Rifle, Pistol, Shotgun, Reloading, Personal Protection in the Home, Personal Protection Outside the Home, Home Firearms Safety, Chief RSO. NRA Endowment Life member.
User avatar
Cloudwraith
OFCC Member
OFCC Member
Posts: 185
Joined: Mon Oct 03, 2011 5:43 pm
Location: Westerville, OH

Re: HUG meeting Schedule Thread

Post by Cloudwraith »

I'm in.
Si Vis Pacem, Para Bellum
User avatar
buckeye43210
Posts: 818
Joined: Thu Jan 01, 2009 7:47 am
Location: Columbus, OH USA

Re: HUG meeting Schedule Thread

Post by buckeye43210 »

I plan on being in attendance.
User avatar
MuzzleReport
Posts: 542
Joined: Tue Feb 01, 2011 2:38 pm
Location: South Central Ohio

Re: HUG meeting Schedule Thread

Post by MuzzleReport »

I'm going to try to make it.
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I'll be there for the start. Not sure how late I can stay.
If you don't stand for something, You'll fall for anything.
User avatar
Klingon00
Posts: 3824
Joined: Tue Dec 09, 2008 11:47 am
Location: Columbus, OH

Re: HUG meeting Schedule Thread

Post by Klingon00 »

I'm planning on it.
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Panera on the south side of Polaris, between Best Buy and Lowes, just west of I-71.
If you don't stand for something, You'll fall for anything.
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

Heh, funny. I had meant to google up exactly where the Panera was... so it was nice to see that you posted a reminder.
And it's funny to me... cause it only took me a moment to dig deep and recall that this was the location of the inaugural meeting of this collection of folks... or at least "a" collection of folks who billed themselves with this moniker.

Was it you, Bill, or was it Bobk that came up with this idea in the first place?
Haha, I could probably click back to page one and figure it out myself. :wink:
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
BobK
Posts: 15602
Joined: Sun Jan 14, 2007 10:26 pm
Location: Houston TX (formerly Franklin County)

Re: HUG meeting Schedule Thread

Post by BobK »

Sevens wrote:Was it you, Bill, or was it Bobk that came up with this idea in the first place?
Haha, I could probably click back to page one and figure it out myself. :wink:
I claim credit for the name "Handloaders User Group" aka HUG. Thought it would be funny to have a bunch of men going to a HUG group meeting. :lol: :lol:
But I do not claim credit for starting the group. I think it was Bill.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).

This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
User avatar
evan price
Forum Janitor
Forum Janitor
Posts: 9044
Joined: Sun Jul 02, 2006 9:23 pm
Location: Westfield, Ohio

Re: HUG meeting Schedule Thread

Post by evan price »

Sorry guys. I was up until 4am working on my new house. Then I got texted at 8am that the guy who was supposed to work Sunday morning had been taken to the hospital and the second shift guy was pulling a double and I needed to go in to work early.
Wanted to be there, but couldn't.
Next time!
"20% accurate as usual, Morty."

Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Post Reply