HUG meeting Schedule Thread

To learn and introduce new loaders. Tips and tricks from old timers.

Moderators: Chuck, Mustang380gal, Coordinators, Moderators

Post Reply
jabeatty
Posts: 14074
Joined: Tue Sep 27, 2005 6:08 pm
Location: East of Cincinnati

Re: HUG meeting Schedule Thread

Post by jabeatty »

Sevens wrote:Yes, and I was fully prepared to have a kinship with ya as we sipped our molten lead "coffees of the day" at the meeting last night but you never showed up! :x

Don't gimme no yadda about the distance either. 7pm and plenty of caffeine to get you home!
I'll plead guilty to spending that part of the evening on a five-mile walk with my gorgeous wife and her psychotic Weimaraner.
--
Someone edited my signature and deleted my posts, and all I got was... this edited signature.
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.

Who is available to meet at the south end of Westerville?

The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.

We can meet from 7pm to whenever.

Bill
If you don't stand for something, You'll fall for anything.
User avatar
Mr. Glock
OFCC Patron Member
OFCC Patron Member
Posts: 8965
Joined: Wed Nov 01, 2006 3:20 pm
Location: NE Ohio

Re: HUG meeting Schedule Thread

Post by Mr. Glock »

You guys really have to rename this thread...everytime I see it pop up on "View New Threads" I think a bunch of softies are going to do a bunch of hugging... :roll:
OFCC Patron, GOA, SAF, YouTube 2A Patreon, NRA Benefactor Life & Hot Stove League Member
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

My schedule looks GOOD for June 2nd, 7 pm at this location that I've not yet been to.
Sounds like a plan!
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
Joe Reeser
Posts: 24
Joined: Sat May 02, 2009 7:50 pm
Location: SW Ohio

Re: HUG meeting Schedule Thread

Post by Joe Reeser »

BigBill wrote:I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.

Who is available to meet at the south end of Westerville?

The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.

We can meet from 7pm to whenever.

Bill
My son and I would both like to attend but I will have to double check my work schedule for that day. We are planning on getting into reloading together so as to split the cost. Neither one of us knows anything but we have read in a couple reloading manuals. I'll have to get back with you tomorrow if you don't mind a couple of noobs.
User avatar
evan price
Forum Janitor
Forum Janitor
Posts: 9044
Joined: Sun Jul 02, 2006 9:23 pm
Location: Westfield, Ohio

Re: HUG meeting Schedule Thread

Post by evan price »

Joe Reeser wrote:
BigBill wrote:I'm available June 2 to host another gathering at my office. That would allow tool and hardware demonstrations.

Who is available to meet at the south end of Westerville?

The address is 5858 Westerville Rd, 1/2 mile south of I-270. Behind the Sunoco Gas Station at the south end of the Glengary shopping center.

We can meet from 7pm to whenever.

Bill
My son and I would both like to attend but I will have to double check my work schedule for that day. We are planning on getting into reloading together so as to split the cost. Neither one of us knows anything but we have read in a couple reloading manuals. I'll have to get back with you tomorrow if you don't mind a couple of noobs.

N00bs are welcome and encouraged.

June 2 at 19:00 sounds good to me at this time.

What's the topic du jour?
"20% accurate as usual, Morty."

Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
User avatar
Joe Reeser
Posts: 24
Joined: Sat May 02, 2009 7:50 pm
Location: SW Ohio

Re: HUG meeting Schedule Thread

Post by Joe Reeser »

I can't make it with my schedule this time. Maybe next time <shrug>
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

Small group last evening. We welcomed Augie and got to know him a little better.

Any ideas for a topic for July?

The first Wednesday is July 7th. Anybody want to host?

BB
If you don't stand for something, You'll fall for anything.
User avatar
BobK
Posts: 15602
Joined: Sun Jan 14, 2007 10:26 pm
Location: Houston TX (formerly Franklin County)

Re: HUG meeting Schedule Thread

Post by BobK »

BigBill wrote:The first Wednesday is July 7th. Anybody want to host?
Well, it is about a week away, so I thought it was time to "poke" this thread back to life.

Wednesday, July 7th works for me. I'd be OK with going back to that Starbucks on Polaris Parkway. What do you guys want to do?
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).

This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
augiet65
Posts: 172
Joined: Sun Jun 03, 2007 12:09 am

Re: HUG meeting Schedule Thread

Post by augiet65 »

July 7th works for me too. There are three Starbuck's on Polaris. What is the address so I can show up at the right one, or if I annoyed everyone last week you can give me the wrong address. :lol:
Coin Carrying member of OFCC
User avatar
BobK
Posts: 15602
Joined: Sun Jan 14, 2007 10:26 pm
Location: Houston TX (formerly Franklin County)

Re: HUG meeting Schedule Thread

Post by BobK »

augiet65 wrote:There are three Starbuck's on Polaris. What is the address so I can show up at the right one,
HUG Schedule:
Wednesday, July 7. 7:00pm to 9:30 whatever.
Starbucks
1187 Polaris Parkway, Columbus, OH‎ - (614) 846-0902‎


Image
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).

This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
User avatar
BigBill
Posts: 638
Joined: Tue Nov 18, 2008 2:34 pm
Location: Central Ohio - Westerville

Re: HUG meeting Schedule Thread

Post by BigBill »

I just realized I have tix to see the Clippers play the Mud Hens on the 7th.

Sorry I can't make it this month.

BB
If you don't stand for something, You'll fall for anything.
User avatar
BobK
Posts: 15602
Joined: Sun Jan 14, 2007 10:26 pm
Location: Houston TX (formerly Franklin County)

Re: HUG meeting Schedule Thread

Post by BobK »

Is anyone else coming tomorrow?

Is it just augiet65 and I?
BobK wrote:HUG Schedule:
Wednesday, July 7. 7:00pm to 9:30 whatever.
Starbucks
1187 Polaris Parkway, Columbus, OH‎ - (614) 846-0902‎


Image
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).

This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
User avatar
Sevens
OFCC Patron Member
OFCC Patron Member
Posts: 7526
Joined: Thu May 07, 2009 8:30 am
Location: Far East Side of CBus

Re: HUG meeting Schedule Thread

Post by Sevens »

Sorry gents, I can't make it this time around. :( Summer is tough for me but I hope to make a real comeback in the fall!

Bill sent me a note to check out this thread and add my regrets. But it did give me an idea...

Any handloader types planning on attending PITP7? We could let the masses know that we'd have a press and some dies set up and we could do a very basic intro to handloading for anyone who is interested and has no idea what we do... or even just for folks that might be curious.

Setting up some casting equipment might be a little more involved than anyone wants -- but since I don't do that, I wouldn't really have a say! :P
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
User avatar
evan price
Forum Janitor
Forum Janitor
Posts: 9044
Joined: Sun Jul 02, 2006 9:23 pm
Location: Westfield, Ohio

Re: HUG meeting Schedule Thread

Post by evan price »

I'll be there Bob.
"20% accurate as usual, Morty."

Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Post Reply