Nah, a good friend never sugar coats things... It was pretty epic.Orochimaru wrote:
You could have at least lied to me and said something like, "it was a light turnout and a rather mellow evening..."
HUG meeting Schedule Thread
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- Gaspode
- Posts: 1635
- Joined: Tue Jan 18, 2011 7:09 pm
- Location: Reynoldsburg, Ohio
Re: HUG meeting Schedule Thread
Pride is all well and good. But a sausage is a sausage.
All humans are vermin in the eyes of Morbo.
All humans are vermin in the eyes of Morbo.
-
- Posts: 1282
- Joined: Sat Mar 06, 2010 2:38 pm
- Location: Columbus, OH
Re: HUG meeting Schedule Thread
It was pretty awesome. Glad I got to meet all of you. Had a great time. I'll definitely try to be a regular!Gaspode wrote:Great meeting, awesome turnout!
~ Glen
What part of "shall not be infringed" is so difficult to understand?
What part of "shall not be infringed" is so difficult to understand?
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
You don't have to try too hard!blah wrote:It was pretty awesome. Glad I got to meet all of you. Had a great time. I'll definitely try to be irregular!
Yep, lots o' fun at this one, but it was unpossible for me to hear what was going on at the west wing of the table, so I hope you guys handled it good down there. Chuck was the only smart one, he split the meeting up by doing the end-around and checking out both wings of the table.
I get the feeling that we didn't solve the worlds handloading problems at this meeting -- this one just kinda flowed like a gathering of gun guys. We touched on handloading a bit, but mostly just enjoyed the company. And the jaguar with the bladder control problem wearing the jeans that were 2.5 sizes too small. (or was I the only one who noticed that?!)
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- Chuck
- OFCC Director
- Posts: 4753
- Joined: Mon Nov 16, 2009 7:06 am
- Location: Licking County
Re: HUG meeting Schedule Thread
They were talking alot of handloading on the West end of the table. Since I don't handload, I moved after a while
Great time!!
I enjoyed meeting you all!
Great time!!
I enjoyed meeting you all!
Ain't activism fun?
"Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company. " - George Washington
"I am only one, but I am one. I cannot do everything, but I can do something.
And because I can not do everything, I will not refuse to do the something I can do.
What I can do, I should do. And what I should do, by the grace of GOD, I will do."- Edward Everett Hale (descendant of Nathan Hale)
"Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company. " - George Washington
"I am only one, but I am one. I cannot do everything, but I can do something.
And because I can not do everything, I will not refuse to do the something I can do.
What I can do, I should do. And what I should do, by the grace of GOD, I will do."- Edward Everett Hale (descendant of Nathan Hale)
-
- Posts: 1282
- Joined: Sat Mar 06, 2010 2:38 pm
- Location: Columbus, OH
Re: HUG meeting Schedule Thread
I didn't need to physically move. I could just turn my head and talk to each end
~ Glen
What part of "shall not be infringed" is so difficult to understand?
What part of "shall not be infringed" is so difficult to understand?
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
Re: HUG meeting Schedule Thread
Plus we got a new member signed up hopefully.
Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.
Anybody want 4 tonnes of lead yet?
I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.
Anybody want 4 tonnes of lead yet?
I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
- Gaspode
- Posts: 1635
- Joined: Tue Jan 18, 2011 7:09 pm
- Location: Reynoldsburg, Ohio
Re: HUG meeting Schedule Thread
You can host the next smelting session... "Yes... yes let me show you.. Yes... now do that 500 more times and I think you'll have that mold down.. then we move on to the 38 wadcutters.."evan price wrote:Plus we got a new member signed up hopefully.
Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.
Anybody want 4 tonnes of lead yet?
I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
Pride is all well and good. But a sausage is a sausage.
All humans are vermin in the eyes of Morbo.
All humans are vermin in the eyes of Morbo.
-
- Posts: 1282
- Joined: Sat Mar 06, 2010 2:38 pm
- Location: Columbus, OH
Re: HUG meeting Schedule Thread
that much lead. you might want to add another zero to that 500Gaspode wrote:You can host the next smelting session... "Yes... yes let me show you.. Yes... now do that 500 more times and I think you'll have that mold down.. then we move on to the 38 wadcutters.."evan price wrote:Plus we got a new member signed up hopefully.
Lord, those pecan rolls are huge. And sitting where I was I got my backside toasty warm from the fire.
Anybody want 4 tonnes of lead yet?
I grew up over there, so our Price family drove over to Rosehill and stopped at Jolly Pirate for hot cocoa and a half-dozen glazed for today's breakfast. Mrs. Price wondered where I was going. "Just be patient, Hon..."
~ Glen
What part of "shall not be infringed" is so difficult to understand?
What part of "shall not be infringed" is so difficult to understand?
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
Who is available for another Polaris area get-together on Sat, March 24?
Starbucks or Panera?
....arrive at 2pm?
Starbucks or Panera?
....arrive at 2pm?
If you don't stand for something, You'll fall for anything.
- MuzzleReport
- Posts: 542
- Joined: Tue Feb 01, 2011 2:38 pm
- Location: South Central Ohio
Re: HUG meeting Schedule Thread
Unless we decide to leave town that weekend I'll be there.
-
- Posts: 521
- Joined: Wed May 04, 2011 4:59 pm
- Location: Northern Franklin County
Re: HUG meeting Schedule Thread
Same here... I should be available.
The second amendment is why we're citizens and not subjects...
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
"Though defensive violence will always be 'a sad necessity' in the eyes of men of principle, it would be still more unfortunate if wrongdoers should dominate just men." St. Augustine A.D. 354-430
- Sevens
- OFCC Patron Member
- Posts: 7526
- Joined: Thu May 07, 2009 8:30 am
- Location: Far East Side of CBus
Re: HUG meeting Schedule Thread
Sunday, March 25th at 2pm would serve me much better -- if possible.BigBill wrote:Who is available for another Polaris area get-together on Sat, March 24?
Starbucks or Panera?
....arrive at 2pm?
I like to swap brass... and I'm looking for .32 H&R Mag, .327 Fed Mag, .380 Auto and 10mm. If you have some and would like to swap for something else, send me a note!
- BigBill
- Posts: 638
- Joined: Tue Nov 18, 2008 2:34 pm
- Location: Central Ohio - Westerville
Re: HUG meeting Schedule Thread
I would not be available that Sunday afternoon.
If more people can make it Sunday than Saturday... go ahead and change to Sunday.
If more people can make it Sunday than Saturday... go ahead and change to Sunday.
If you don't stand for something, You'll fall for anything.
- Gaspode
- Posts: 1635
- Joined: Tue Jan 18, 2011 7:09 pm
- Location: Reynoldsburg, Ohio
Re: HUG meeting Schedule Thread
Sorry, wont be able to make this one. I can never do Saturdays. Work doesn't allow for it. Any other day is doable.
Pride is all well and good. But a sausage is a sausage.
All humans are vermin in the eyes of Morbo.
All humans are vermin in the eyes of Morbo.
- MuzzleReport
- Posts: 542
- Joined: Tue Feb 01, 2011 2:38 pm
- Location: South Central Ohio
Re: HUG meeting Schedule Thread
I'm flexible as to Sat/Sun.