Vance Bullets
Moderators: Chuck, Mustang380gal, Coordinators, Moderators
- mzimov
- Posts: 345
- Joined: Sun Nov 25, 2007 8:20 pm
- Location: SW Ohio
Vance Bullets
I've been using Vance lead bullets for a few years now; I shoot about 500 rounds a week. I've used the 45 cal. 200 gr. LSWC and the 230 gr. LRN. These are about the most affordable bullets available locally in bulk. Lately, the price has been increased from $29/500 to $32/500 at a gun store in Cincinnati, $35 at the gun shows directly from Vance's (I don't know why they are higher at the gun shows, but I refuse to buy them there out of principle).
My issue revolves around quality control. Lately, seems like every other box has bullets encased in blue lube. So much lube is left on the bullets that it builds up on the mouth of my chamber, and throws the accuracy off substantially. Why is the price going up and the quality going down? Maybe the store I buy them from gets the bottom of the barrel in terms of quality, but they aren't sold as seconds.
I'm experimenting with other manufacturers' bullets from the internet. Missouri Bullet Company has a decent price and seems to promote quality, so we'll see. Anyway, someone needs to send Vance's a message about jacking up prices on crap. Nothing is as dissappointing as opening a box of badly needed bullets and finding they need scraping with a pocket knife prior to loading.
My issue revolves around quality control. Lately, seems like every other box has bullets encased in blue lube. So much lube is left on the bullets that it builds up on the mouth of my chamber, and throws the accuracy off substantially. Why is the price going up and the quality going down? Maybe the store I buy them from gets the bottom of the barrel in terms of quality, but they aren't sold as seconds.
I'm experimenting with other manufacturers' bullets from the internet. Missouri Bullet Company has a decent price and seems to promote quality, so we'll see. Anyway, someone needs to send Vance's a message about jacking up prices on crap. Nothing is as dissappointing as opening a box of badly needed bullets and finding they need scraping with a pocket knife prior to loading.
-
- Posts: 16237
- Joined: Mon Jul 04, 2005 8:42 pm
- Location: SW Ohio
Vance's has had those issues before. They are a small outfit attempting to serve a rather large customer base, and sometimes the hurry-up shows in that manner. By all means, look around at what their competitors are offering.
Quit worrying, hide your gun well, shut up, and CARRY that handgun!
********************************************************************************
1911 and Browning Hi Power Enthusianado.
********************************************************************************
1911 and Browning Hi Power Enthusianado.
- weakhand luke
- Posts: 1493
- Joined: Mon Jul 04, 2005 3:46 pm
- Location: Sweet Land of Liberty
- evan price
- Forum Janitor
- Posts: 9044
- Joined: Sun Jul 02, 2006 9:23 pm
- Location: Westfield, Ohio
I can save you some money and get you some good bullets.
I use KEAD hardcast bullets available from www.keadbullets.com
His prices are about the best I can find for hard alloy bullets.
230-rn's are $60 per thousand, and 200 LSWC are $54 per thousand. They will ship USPS flat rate insured for $11 for 2000 in one box.
If you want smaller bullets such as 9mm he can get 3000 in one box for the same USPS flat rate price.
Right now I get 3000 9mm 125-RN for $128 shipped.
I like their alloy, it is 21 brinell and 90/8/2 and it does not lead up my barrels. I have shot a lot of KEAD and recommend them. Their only issue is he does not like to keep inventory so he does batch runs, and if he does not have what you want it might take a couple of weeks to get some.
The owner is 100% a shooter himself and a supporter of shooting sports.
I use KEAD hardcast bullets available from www.keadbullets.com
His prices are about the best I can find for hard alloy bullets.
230-rn's are $60 per thousand, and 200 LSWC are $54 per thousand. They will ship USPS flat rate insured for $11 for 2000 in one box.
If you want smaller bullets such as 9mm he can get 3000 in one box for the same USPS flat rate price.
Right now I get 3000 9mm 125-RN for $128 shipped.
I like their alloy, it is 21 brinell and 90/8/2 and it does not lead up my barrels. I have shot a lot of KEAD and recommend them. Their only issue is he does not like to keep inventory so he does batch runs, and if he does not have what you want it might take a couple of weeks to get some.
The owner is 100% a shooter himself and a supporter of shooting sports.
"20% accurate as usual, Morty."
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
Striking down evil with the mighty sword of teamwork and the hammer of not bickering!
Carpe Noctem- we get more done after 2 am than most people do all day.
-
- Posts: 17
- Joined: Fri Mar 27, 2009 6:05 pm
Re: Vance Bullets
Designing a commercial bullet lubricant to meet several specifications is a scientific as well as an artistic endeavor to say the least. Scientific in that it has to lubricate the bore, produce as little smoke as possible, retain itself in the lube ring(s) without pulling out, and allow easy reloading through bullet drop tubes. Artistic in that it has to be presentable (texture, color, adherence - or lack thereof, and smell - or lack thereof again). Rolling all of these criteria together presents a real challenge but one that is attainable when each item is solved individually.
Your problem is one that cannot be remedied without warming the bullets and then reapplying some other form of lubricant. The existing lubricant has to be removed to rid the bullets' surfaces to prevent buildup in your seating die. However, you may not have the accessories to reapply another bullet lubricant which makes the matter even more 'sticky'. There is however, another method that you might want to consider; that is to apply Johnson's Paste wax to the cleaned bullets. The Paste Wax will dry and will provide enough lubricating properties to allow you to shoot those cast bullets. Sounds like a lot of work but it may be your only option to use them. The Paste Wax can be applied by inserting a few bullets into a jar and a spoonful of Paste Wax deposited into it as well. A few dozen shakes in a warm atmosphere will evenly coat all the bullets. Remove the bullets and let them dry on a flat surface.
I trust that this information will help you decide which method best suits your needs to allow you to shoot those bullets and not throw them out.
Your problem is one that cannot be remedied without warming the bullets and then reapplying some other form of lubricant. The existing lubricant has to be removed to rid the bullets' surfaces to prevent buildup in your seating die. However, you may not have the accessories to reapply another bullet lubricant which makes the matter even more 'sticky'. There is however, another method that you might want to consider; that is to apply Johnson's Paste wax to the cleaned bullets. The Paste Wax will dry and will provide enough lubricating properties to allow you to shoot those cast bullets. Sounds like a lot of work but it may be your only option to use them. The Paste Wax can be applied by inserting a few bullets into a jar and a spoonful of Paste Wax deposited into it as well. A few dozen shakes in a warm atmosphere will evenly coat all the bullets. Remove the bullets and let them dry on a flat surface.
I trust that this information will help you decide which method best suits your needs to allow you to shoot those bullets and not throw them out.
Matt Dardas
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
- BobK
- Posts: 15602
- Joined: Sun Jan 14, 2007 10:26 pm
- Location: Houston TX (formerly Franklin County)
Re: Vance Bullets
Welcome to the forum, Matt!dardascastbullets wrote:Designing a commercial bullet lubricant to meet several specifications is a scientific as well as an artistic endeavor to say the least.
I am a: NRA Life Member, Texas State Rifle Association Life Member, Texas Firearms Coalition Gold member, OFCC Patron Member, former JFPO member (pre-SAF).
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
This froggie ain't boiling! Shall not be infringed! Μολών Λαβέ
More Obamination. Idiots. Can't we find an electable (R) for 2016?
- tmcblane
- Posts: 817
- Joined: Fri Mar 27, 2009 6:49 am
- Location: Champaign County
Re: Vance Bullets
Thanks for the Link to your bullets Matt! I have bookmarked it and will give you a shot (no pun intended..............well maybe a little ) when I am ready to reorder.
- dclaarjr
- Posts: 2045
- Joined: Sat Apr 26, 2008 9:40 pm
- Location: Sandusky County
Re: Vance Bullets
I checked out you website Matt. I will be placing an order when I get back from vacation.
NRA Certified Instructor for Basic Handgun and Personal Protection.
OFCC Member
4 County Conservation Club Member
US Army Veteran
OFCC Member
4 County Conservation Club Member
US Army Veteran
-
- Posts: 17
- Joined: Fri Mar 27, 2009 6:05 pm
Re: Vance Bullets
Thanks for the welcome Bob!BobK wrote:Welcome to the forum, Matt!dardascastbullets wrote:Designing a commercial bullet lubricant to meet several specifications is a scientific as well as an artistic endeavor to say the least.
I felt compelled to respond to mzimov's post to offer a viable solution so that he could reload and shoot those bullets with as little correctional effort as possible. I hope that he gets a chance to read my post and try the remedy - it does work.
Matt Dardas
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
-
- Posts: 728
- Joined: Fri Apr 28, 2006 9:43 am
- Location: SW Ohio
Re: Vance Bullets
I have definitely had major issues with the ungodly amount of lube on the vance lead. It really is fairly sticky lube and is kind of a pain to remove it. I have been tumbling rounds with walnut media after loading for about 10 minutes and it has seemed to help remove a majority of it. The other real issue with them is that they really have a tendency to have just a touch of lead outside of their normal tolerances. It has caused me major problems with getting their 200 grn RNFP .45 to chamber at all. The 185 SWC shoots like a champ and does not seem to have as much of a problem with that, but it does consistently have more of an issue with excessive lube.
-
- OFCC Member
- Posts: 11446
- Joined: Tue Nov 08, 2005 9:19 am
- Location: Exit 13 on the ohio Turnpike :-)
Re: Vance Bullets
There is a fine balance when lubing bullets, between temperature and lube pressure. It can be tough to keep it perfect. When it is imperfect lube ends up in places other than the grooves. Sometimes it transfers there from the other bullets, sometimes it shoots there while the bullet is in the die.
Many production bullet lubes are more focused on looking pretty and allowing bulk packaging than anything else. This is why most home users never use those lubes.
Bill
Many production bullet lubes are more focused on looking pretty and allowing bulk packaging than anything else. This is why most home users never use those lubes.
Bill
Have a great day today unless you have made other plans .
-
- Posts: 17
- Joined: Fri Mar 27, 2009 6:05 pm
Re: Vance Bullets
Actually, applying bullet lubricant to cast bullets is quite an easy operation as long as the quality control is carried out religiously (monitoring temperature, and pressure) and recording that information for documentation. Perfectly lubricated bullets can be produced as long as the QC is carried out repetitively. Zero QC = Zero quality. A properly engineered bullet lubricant will solve all the individual elements of the bullet 'equation'.willbird wrote:There is a fine balance when lubing bullets, between temperature and lube pressure. It can be tough to keep it perfect. When it is imperfect lube ends up in places other than the grooves. Sometimes it transfers there from the other bullets, sometimes it shoots there while the bullet is in the die.
Many production bullet lubes are more focused on looking pretty and allowing bulk packaging than anything else. This is why most home users never use those lubes.
Bill
Matt Dardas
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
Dardas Cast Bullets
http://www.dardascastbullets.com" onclick="window.open(this.href);return false;
- weakhand luke
- Posts: 1493
- Joined: Mon Jul 04, 2005 3:46 pm
- Location: Sweet Land of Liberty
Re: Vance Bullets
An ol' timer once told me, "ya can't make a bullet bad enuff that it won't perform great at 50 feet".
My bullets usually look like I've tried to prove him wrong.
My bullets usually look like I've tried to prove him wrong.
-
- OFCC Member
- Posts: 11446
- Joined: Tue Nov 08, 2005 9:19 am
- Location: Exit 13 on the ohio Turnpike :-)
Re: Vance Bullets
I'm speaking of applying bullet lube with equipment more on the level of home user. Specifically Star lube sizers. I realize you do not use them for commercial purposes. Many many home users find popular commercial bullet lubes to not be optimum for anything except ease of application and tolerance for bulk shipping.dardascastbullets wrote:Actually, applying bullet lubricant to cast bullets is quite an easy operation as long as the quality control is carried out religiously (monitoring temperature, and pressure) and recording that information for documentation. Perfectly lubricated bullets can be produced as long as the QC is carried out repetitively. Zero QC = Zero quality. A properly engineered bullet lubricant will solve all the individual elements of the bullet 'equation'.willbird wrote:There is a fine balance when lubing bullets, between temperature and lube pressure. It can be tough to keep it perfect. When it is imperfect lube ends up in places other than the grooves. Sometimes it transfers there from the other bullets, sometimes it shoots there while the bullet is in the die.
Many production bullet lubes are more focused on looking pretty and allowing bulk packaging than anything else. This is why most home users never use those lubes.
Bill
Bill
Have a great day today unless you have made other plans .