Page 202 of 205

Re: How about some pics

Posted: Sun Aug 02, 2015 6:13 am
by carmen fovozzo
That thing is sweet...

Re: How about some pics

Posted: Sun Aug 02, 2015 7:20 am
by ohiozx3
dan dan the XD40 man wrote:How to spend $1400 dollars on a 10/22

Image
:shock: :shock: :shock:

Re: How about some pics

Posted: Sat Aug 08, 2015 10:40 pm
by ohiozx3
Rock island in 22 TCM

Image
Image
Image
Image

Re: How about some pics

Posted: Sat Aug 29, 2015 7:47 pm
by Quack
Picked up another 2011 frame from my FFL last night, and this morning fit the slide to the frame. I just need safeties, pins and flat trigger to finish it off

Took 2 hours to get from this...
Image

To this...(filed/stoned by hand)
Image

Image

Re: How about some pics

Posted: Wed Sep 09, 2015 2:58 pm
by Quack
Finally got around to fitting the Kart bushing and replacing the 10-8 bushing.

This was a while ago, when it had the 10-8 bushing

Image

Same load (Win231), with fit bushing. Shot 2 -10 round groups, the lower was the 1st, upper was 2nd
Image

Next was trying a new powder (WST). These are 20rd groups (@~15yards) shot continuously. The groups are under 2"
Image

Re: How about some pics

Posted: Wed Sep 09, 2015 3:23 pm
by TSiWRX
Looks good! 8)

Re: How about some pics

Posted: Wed Sep 09, 2015 3:27 pm
by Quack
Thanks!!!

BTW, I have to adjust the sights a little since I tightened up the bushing fit.

Re: How about some pics

Posted: Fri Sep 25, 2015 7:13 am
by keepitsimple
Image

Image

RIA 1911-CS
Original parked finish, for now.
ultra slim (5/16" thick) cocobolo double diamond grips
Caspian Trik trigger
John Masen extended slide release, ground down and re-shaped
Armscor GI grip safety cut down and blended to the frame tangs
Armscor GI hammer with spur removed
Stock mainspring housing w/ butt rounded and serrations removed
Satin black Gunkote on MSH, trigger, hammer, slide release, thumb safety, and grip safety.
Fed by Chip McCormick Shooting Star 8 round mags w/ cut down and reshaped X Grip spacers.

Re: How about some pics

Posted: Fri Sep 25, 2015 7:24 am
by Mortar34
Mine and the wife's nightstand components.

Image

Re: How about some pics

Posted: Fri Mar 18, 2016 10:29 am
by Curzyk
Still building it, but here's my first AR build:
Image
Higher Resolution Picture Available
  • Ares Defense SCR Lower
  • Gibbz Arms G4 non-reciprocating right-side charge, left-side eject upper receiver
  • UTG 15" free float keymod handguard
  • 16" fluted free-floating barrel
  • (not pictured above) Troy Industries Micro HK Style Front and Rear Folding Battle Sight (Black)

Re: How about some pics

Posted: Fri Mar 18, 2016 9:14 pm
by Rhino
My gun collection.

Image

Unfortunately the water was a lot deeper than it looks and we were unable to recover any of my guns when the boat capsized. Darn! :-)

Re: How about some pics

Posted: Sat Apr 30, 2016 6:24 pm
by jeep45238
Image

Progress made tonight. Cased gauged and boxed 14,050 rounds of ammo. Then opened up the gray tool box that's half full of lead bullets and tumbled lubed until I ran out of space. Bullets are .356 diameter 127 grain trunticated cones. All of the bullets will get a second coat, but I'm looking to modify my mold to bump the diameter to .358 dia

Big plastic ammo can has polished 9mm brass in it, as does the .30 cal next to it. Wooden ammo box has manuals, scales, case gauge, calipers, etc. in it. Coffee can has sized/primed casings to put in the press to take the spots of ones I take off to measure the charge and keep rolling without making a mess. .30 cals on the left end will have sorted 9mm brass in it. .30 cal on top of the wooden one is my primer catcher. I added a quick disconnect plastic plumbing fitting to my press to take a length of vinyl tubing, taped a heavy axle nut on it to keep it in the can, and no more missed primers or stopping to empty it out.

Drawers are filled with misc. supplies.

Re: How about some pics

Posted: Thu May 05, 2016 9:43 pm
by revred
As low as they've kept the water level in Buckeye Lake due to the dam repairs, I was really hoping to find mine. No luck, so far. :wink:
Rhino wrote:My gun collection.

Image

Unfortunately the water was a lot deeper than it looks and we were unable to recover any of my guns when the boat capsized. Darn! :-)

Re: How about some pics

Posted: Wed May 11, 2016 4:42 pm
by jeep45238
My little homemade mount for my baby press. A kind soul donated a Lee classic press to me, and it just so happens that the front mounting bolt for the strongmount of my press mates up to the rearward most hole of the press and allows the ram to clear the table top.

I'm not sure if I"ll be keeping it there, I have a feeling this little cast press needs the load spread out a bit more for full on sizing. It did pretty well sizing without being mounted up to anything though.

Image

Re: How about some pics

Posted: Fri Jul 08, 2016 9:36 am
by ROME
Image

And 5 months later there she is