How about some pics

This is where you can talk about all equipment issues; firearms, ammunition, magazines, care & repair, holsters, gun cases, etc.

Moderators: Coordinators, Moderators

Re: How about some pics

Postby Thawmytongue » Fri May 01, 2015 7:58 am

Figured I should post a pic or two...

Here is my current favorite AR, my goal was to make the shortest possible AR without straying into SBR territory. LWRCI buttstock and 13.7" Rainer barrel with a pinned YHM .30 QD flash hider make a nice compact package.

Image

Here she is next to a "standard" AR with a 16" barrel, A2 flash hider and Magpul CTR stock.

Image


Here's a picture of the XDm where I was trying to get creative with lighting... I know I'm not an artist.

Image
-Matt


"Carry often, apply sparingly."
User avatar
Thawmytongue
 
Posts: 73
Joined: Sat Mar 21, 2015 1:24 pm
Location: Lewis Center, OH

Re: How about some pics

Postby Thawmytongue » Fri May 01, 2015 7:59 am

Breitling wrote:Image


Specs on this beauty? Spare no detail... and type slowly :wink:
-Matt


"Carry often, apply sparingly."
User avatar
Thawmytongue
 
Posts: 73
Joined: Sat Mar 21, 2015 1:24 pm
Location: Lewis Center, OH

Re: How about some pics

Postby Breitling » Fri May 01, 2015 8:22 am

Thawmytongue wrote:
Breitling wrote:Image


Specs on this beauty? Spare no detail... and type slowly :wink:


Accuracy International AXMC System in "pale brown" (24 inch barrel in 308, 20MOA base, but has a QD barrel system to run optional barrels in "same-footprint" cartridges)
Atlas PSR QD Bipod
SWR Specwar 762 Suppressor

Current Optics:
Nightforce NXS 5.5-22x55
Nightforce Unimount

En-route Optics:
Premier Heritage 5-25x56 Scope
Spuhr 4002 Unimount
Machine guns are better than any drug in the world.
Breitling
 
Posts: 20
Joined: Wed Apr 29, 2015 7:15 pm

Re: How about some pics

Postby Breitling » Fri May 01, 2015 8:29 am

here's my other bolt gun....

EDM Windrunner M96 50bmg...

Image
Machine guns are better than any drug in the world.
Breitling
 
Posts: 20
Joined: Wed Apr 29, 2015 7:15 pm

Re: How about some pics

Postby Thawmytongue » Sat May 02, 2015 3:55 pm

Breitling, nice guns and nice glass. Never even heard of that Windrunner. Off to the googles...
-Matt


"Carry often, apply sparingly."
User avatar
Thawmytongue
 
Posts: 73
Joined: Sat Mar 21, 2015 1:24 pm
Location: Lewis Center, OH

Re: How about some pics

Postby Breitling » Mon May 04, 2015 8:11 am

Thawmytongue wrote:Breitling, nice guns and nice glass. Never even heard of that Windrunner. Off to the googles...


Thanks!

The Windrunner is not a well known gun though they have been around (I think) for about 20 years. Bill Ritchie (owner) is a wonderful guy who has been into long range high caliber mile+ shooting for a long time and EDM was his opus. EDM might be more well-recognized in the movie Shooter (Mark Wahlburg). The gun in the movie (Cheytac M200) was originally designed by EDM with some minor modifications to suit what Cheytac wanted. The EDM Windrunner M96 was also manufactured with Remington markings and known as the "R50". Only a dozen of those guns were made as the project faltered. Most recently (now that the Cheytac M200 is discontinued) another company THOR has licensed the action/take-down design from EDM and begun making a gun similar to the Cheytac. It is chambered in 408.

Anyhow, here's a pic from this weekend to bump the thread!

Image
Machine guns are better than any drug in the world.
Breitling
 
Posts: 20
Joined: Wed Apr 29, 2015 7:15 pm

Re: How about some pics

Postby TSiWRX » Mon May 04, 2015 11:43 am

You've got some really neat stuff.....<drools!> 8)
Allen - Shaker Heights, Ohio
User avatar
TSiWRX
OFCC Patron Member
OFCC Patron Member
 
Posts: 6502
Joined: Fri Jan 28, 2011 8:33 pm
Location: Cleveland/Shaker Heights

Re: How about some pics

Postby Thawmytongue » Mon May 04, 2015 2:01 pm

Breitling wrote:
Thawmytongue wrote:Breitling, nice guns and nice glass. Never even heard of that Windrunner. Off to the googles...


Thanks!

The Windrunner is not a well known gun though they have been around (I think) for about 20 years. Bill Ritchie (owner) is a wonderful guy who has been into long range high caliber mile+ shooting for a long time and EDM was his opus. EDM might be more well-recognized in the movie Shooter (Mark Wahlburg). The gun in the movie (Cheytac M200) was originally designed by EDM with some minor modifications to suit what Cheytac wanted. The EDM Windrunner M96 was also manufactured with Remington markings and known as the "R50". Only a dozen of those guns were made as the project faltered. Most recently (now that the Cheytac M200 is discontinued) another company THOR has licensed the action/take-down design from EDM and begun making a gun similar to the Cheytac. It is chambered in 408.

Anyhow, here's a pic from this weekend to bump the thread!

Image


Is that a NEA CCS or a MVB compact stock? When I was planning my 13.7" non-SBR, I thought about the NEA but wasn't too keen on the proprietary BCG, so I went with the LWRCI compact. Right after I built it, I saw the MVB using a stock BCG...doh!


ETA - After my initial post I was admiring the picture again and I noticed the sear pin on the top AR. You wanna adopt a son?
-Matt


"Carry often, apply sparingly."
User avatar
Thawmytongue
 
Posts: 73
Joined: Sat Mar 21, 2015 1:24 pm
Location: Lewis Center, OH

Re: How about some pics

Postby TSiWRX » Mon May 04, 2015 2:11 pm

^ I was first in line! :P :lol:
Allen - Shaker Heights, Ohio
User avatar
TSiWRX
OFCC Patron Member
OFCC Patron Member
 
Posts: 6502
Joined: Fri Jan 28, 2011 8:33 pm
Location: Cleveland/Shaker Heights

Re: How about some pics

Postby Thawmytongue » Mon May 04, 2015 2:48 pm

TSiWRX wrote:^ I was first in line! :P :lol:


Fine.... Allen you want a brother? :mrgreen:
-Matt


"Carry often, apply sparingly."
User avatar
Thawmytongue
 
Posts: 73
Joined: Sat Mar 21, 2015 1:24 pm
Location: Lewis Center, OH

Re: How about some pics

Postby Stryker74 » Mon May 04, 2015 2:50 pm

Thawmytongue wrote:
TSiWRX wrote:^ I was first in line! :P :lol:


Fine.... Allen you want a brother? :mrgreen:


Sorry guys.... Bob adopted me a couple of months ago! :mrgreen: :lol:
Aaron

NRA Life Endowment Member
USCCA Certified Instructor
NRA Certified Instructor - Pistol, Refuse To Be A Victim
NRA Range Safety Officer

http://www.techarms-training.com


Want to become more active with OFCC, and the fight for your rights? Click the link to find out how!
viewtopic.php?f=12&t=64852
User avatar
Stryker74
OFCC Coordinator
OFCC Coordinator
 
Posts: 1468
Joined: Wed Mar 06, 2013 8:15 pm
Location: Grove City, Ohio

Re: How about some pics

Postby Breitling » Mon May 04, 2015 2:56 pm

Thawmytongue wrote:
Is that a NEA CCS or a MVB compact stock? When I was planning my 13.7" non-SBR, I thought about the NEA but wasn't too keen on the proprietary BCG, so I went with the LWRCI compact. Right after I built it, I saw the MVB using a stock BCG...doh!


ETA - After my initial post I was admiring the picture again and I noticed the sear pin on the top AR. You wanna adopt a son?


That is an NEA CCS. I like it. It runs well (most of the time) but I don't clean it. It actually stopped running after about 1500 rounds... so I had to clean it!

As for the sear pin... :)
Machine guns are better than any drug in the world.
Breitling
 
Posts: 20
Joined: Wed Apr 29, 2015 7:15 pm

Re: How about some pics

Postby PantacUSA » Fri Jun 05, 2015 4:14 am

Image

Nowhere near as exotic, but they do go "bang" every time I ask them to. :D


W.
PantacUSA
 
Posts: 5
Joined: Fri Jun 05, 2015 3:42 am

Re: How about some pics

Postby ohiozx3 » Thu Jul 16, 2015 9:35 pm

got this on trade today.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Si Vis Pacem, Para Bellum.
User avatar
ohiozx3
 
Posts: 801
Joined: Sun May 22, 2011 5:43 pm
Location: Lake County.

Re: How about some pics

Postby dan dan the XD40 man » Sun Aug 02, 2015 12:17 am

How to spend $1400 dollars on a 10/22

Image
Poop!
User avatar
dan dan the XD40 man
 
Posts: 8370
Joined: Mon Dec 26, 2005 9:49 am
Location: Cleveland Ohio

PreviousNext

Return to Firearms & Gear

Who is online

Users browsing this forum: No registered users and 3 guests